Featured Products
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
€POA
GRP Kit / Fibreglass Repair Kit (2m)
(€152.90 inc VAT)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
€124.31 ex VAT (€152.90 inc VAT)
EBARA BEST FOUR M SUMP PUMP
(€969.38 inc VAT)
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
€788.11 ex VAT (€969.38 inc VAT)
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION
Magnet for Loss of Rotaion Alarm on a BioDisc.
If you need the full kit see below :-
Kingspan Parts Loss of Rotation Kit
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End)
Klargester BC BioDisc Whole Bearing for the drive end. A Klargester BC BioDisc nylon bearing for the Klargester BC BioDisc Sewage Treatment Systems (30mm) and comes with a grey insert.
Diaphragm Set EL150 or EL250
Diaphragm Set EL150 or EL250
This Diaphragm Kit is suitable for Secoh EL (JDK) Blowers.
This kit contains:
2 EL diaphragms plus their plastic surrounding frame & 4 magnetic spacers to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
SECOH JDK-S-150 SINGLE SERIES BLOWER
SECOH JDK-S-150 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This is a direct replacement for the Secoh Sangyo EL-80-15 and ET100.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of...
P018-P025 ACCESS COVER LOCK
P018-P025 Access Cover Lock
Biotec P18-25 Access cover lock - long barrel type, complete with nut.
Note, that the older version of these are now obsolete. The thread length on the new version is 12mm and slight adjucstments might need made if its an older unit
Calpeda MXH 402E Water Pump Max 22.5m Head 133L/Min
Calpeda MXH 402E Water Pump Max 22.5m Head 133L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB- Invert 300mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework
Materials:Glass Reinforced Plastic (GRP)
P006 Airlift
P006 Airlift
This Airlift is used on our P006 Sewage treatment system. It helps to distribute waste water from the settling tank up through the pipework and is then filtered throuhg the bale filtration.
Comes complete with Distrabustion cone and Connections
Dims: 1700mm H
Material: Acrylonitrile Butadiene Styrene (ABS Plastic)
Calpeda MXH 804A Water Pump Max 48m Head 216L/Min
Calpeda MXH 804A Water Pump Max 48m Head 216L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
BLOWER HOUSING BASE
BLOWER HOUSING BASE
Base for blower housing - this base is only suitable for the version of the blower housing which clips down. If you have a screw down base you will need a new blower housing complete.
Dimensions are in the technical drawings.
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
BD/BE/BF DUPLEX DRIVE CHAIN - 102 PITCHES
BD/BE/BF Duplex Drive Chain - 102 pitches
The BD/BF 5/8" duplex drive chain is suitable for all Klargester BD/BE/BF BioDiscs (2m length)
BIODISC BA/BB NYLON WASHERS
BA/BB BIODISC NYLON WASHERS
PRICE IS FOR SINGLE WASHER**
BA / BB BioDisc Nylon spacer washers used for the shaft.
We recommend to order x6 in total.
A delivery charge of €9.20 + vat will be added to the order at the checkout.
P006 STEEL BEAM
P006 Steel Beam
Fully galvanised steel beam to suit P006 Biotec sewage treatment system. Is used to support filtration bale
DRY GUARD BA/BB/BC BIODISC
DRY GUARD BA/BB/BC BIODISC
The dry guard fits to the gearbox support beam and protects the pulley system from water ingress.
Suits BA ,BB & BC BioDisc's
COALESCER FOAM FILTER - NSBD024-36
COALESCER FOAM FILTER - NSBD024-36
Klargester Full Retention Separator Foam Filters - nsbd024-36
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
BC 1/2 Nylon Bearing
BC 1/2 Nylon Bearing
This is a Klargester half bearing to fit the non-drive end of a Klargester BioDisc BC Sewage Treatment System.
30mm wide
Grease Adaptor Kit BD-BF BioDisc
Grease Adaptor Kit BD-BF BioDisc
Grease Adapter Kit for Biodisc BD-BF.
P006 BALE
BALE ASSEMBLY P006
Filtration Media to Suit Biotec P006 Sewage Treatment Systems
Comes complete with Enkamat Netting/Matting
Bale size: 1200mm (L) X 825mm (W) X 600mm (H)
COALESCER FOAM FILTER - NS3-6
COALESCER FOAM FILTER - NS3-6
Klargester Full Retention Separator Foam Filters - ns3-6
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Calpeda MXP 404/B Water Pump Max 46m Head 120L/Min
Calpeda MXP 404/B Water Pump Max 46m Head 120L/Min
These clean water horizontal multi-stage centrifugal pumps with plastic impellers are suitable for water supply. This range of water pumps are universal pump, for domestic use, for civil and industrial applications, for garden use and irrigation. This water pump has a maximum head heigh of 46m with a maximum flow rate of 120 l/min.
Applications
For...
BA Rotor Assembly Complete
BA Rotor Assembly Complete
Full rotor pack for 1 x BA Biodisc
This product is made to order, lead time 2 to 3 weeks.
Secoh JDK 100-120 Service Kit
Secoh JDK 100-120 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
COALESCER FOAM FILTER - NSBP-003, 004, 006
COALESCER FOAM FILTER - NSBP-003, 004, 006
Klargester Full Retention Separator Foam Filters - nsbp-003, 004, 006
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Green panel beacon and adaptor
Green panel beacon and adaptor
This adapter allows customers to use the oldstyle green control panel but with the new 6 volt beacon.
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-250 Charles Austen Blower service kit for the includes:-
4 Diaphragms
1 Filter
16 Valves
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
Klargester BC BioDisc Bearing kit for the drive end.
The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
KLARGESTER BA BIODISC SHAFT
KLARGESTER BA BIODISC SHAFT
Complete shaft to suit Klargester BA - 25mm
COALESCER FOAM FILTER - NSBE040 - NSBE050
COALESCER FOAM FILTER - NSBE040 - NSBE050
Klargester Full Retention Separator Foam Filters - nsbe040 - nsbe050
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Delta Clearwater Sewage treatment Lid/Cover (900mm)
*2 Week Lead Time From Point of Order*
HOSE TAIL ELBOW (3/4 BSP 19MM)
HOSE TAIL ELBOW (3/4 BSP 19MM)
3/4 Hosetail Elbow for BIOTEC airlift unit's for P018-25
Latch Block - Old RBC Lids
Latch Block - Old RBC Lids
latch block complete with bolt for old style klargester RBC unit's
This latch hold the lid in place, comes with bolt and washer
Material: Hardened Teflon plastic
BG-Bottom-Pulley
BG-Bottom-Pulley
This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft.
This requires a BG Pulley locking element
COALESCER FOAM FILTER 315X80X600
COALESCER FOAM FILTER 315X80X600
Klargester Full Retention Separator Foam Filters - 315x80x600
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Calpeda MXH 405C Water Pump Max 56.5m Head 133L/Min
Calpeda MXH 405C Water Pump Max 56.5m Head 133L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BG top pulley comes with a grubscrew to lock into position
19T 3/4 INCH DUPLEX PINION BORED 30mmF7
Klargester BD Biodisc Shaft
Klargester BD Biodisc Shaft
Shaft only to suit BD biodisc rotor
3.15 AMP FUSE FOR GREEN PANEL
3.15 AMP FUSE FOR GREEN PANEL
3.15amp Motor-Blower fuse for the Small Green Control Panel.
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
Panasonic pinion wheel is suitable for Klargester B1 to BF treatment systems. Suited for panasonic gearboxes.
PCD - 180mm
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT
Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant
17 Teeth
5/8" Pitch
F7 Tolerence
20mm Wide High Torque Drive Pulley
Bored 20mm
Grubscrew Supplied
British Standard Keyway
BIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM
This galvanised steel angle Radial Arm for BA-BB biodisc sewage treatment plant, this part hold the discs in place and stops them from turning individually.
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-40 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
COALESCER FOAM FILTER - (250 X 300 X 100)
COALESCER FOAM FILTER - (250 X 300 X 100)
Klargester Full Retention Separator Foam Filters - 250 x 300 x 100
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Calpeda MXH 406A Water Pump Max 68.5m Head 133L/Min
Calpeda MXH 406A Water Pump Max 68.5m Head 133L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
BD Metal Top Retaining Plate for Front Bearing
BD Metal Top Retaining Plate for Front Bearing
Used on BD Biodisc
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
Come complete with:
1no pump chamber
1no 300 x 200 x 9mm Polypropylene Sheet
1no BA-BB Biodisc IPS Manifold -
Automatic Pump
BD/BE Bottom Pulley for Biodisc
BD BioDisc Bottom Pulley
The BD BioDisc Bottom Pulley fits the main media shaft on all Klargester BD BioDisc Sewage Treatment Systems.
A BD BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
Extension Neck (Alpha Tank)
Extension Neck (Alpha Tank)
Spetic Tank Extension to suit Alpha range (2800-3600Litre tank)
This 460mm diametre tank extension with clear plastic sleeve and flanged base.