Direct Ultrasteel Hot Water Cylinders

Direct Ultrasteel Hot Water Cylinders For Sale

Kingspan Ultrasteel Direct hot water cylinders are the ideal solution for those installations where space is limited,  a small footprint is essential and the preferred heat source is electrical. Every model features two 3kW immersion heaters that come factory fitted to the hot water cylinder, with the lower immersion suitable for use in conjunction with off-peak/low tariff electricity. Ultrasteel hot water cylinders deliver high flow rates and mains pressure hot water (regulated up to 3 bar) for powerful showers and the fast filling of baths or sinks, making them ideal for homes with multiple bathrooms or extra utility rooms.

Known for their simplicity and efficiency, direct hot water cylinders come equipped with an electric immersion heater or heating element that can heat water rapidly. When you turn on a hot water tap, the immersion heater inside the cylinder quickly heats the water, ensuring you have almost instant access to hot water.

Available in a range of capacities, from 70 to 300 litres, our direct cylinders are easy to install and maintain. Since they do not require a separate heat source like a boiler or external heat pump, there are fewer components and systems involved, making them straightforward and cost-effective to set up. Maintenance usually involves periodic checks and replacement of the immersion heater if needed.

Choose a slimline direct unvented hot water cylinder if you are limited on space. By being taller and slimmer, these cylinders don’t necessary compromise on capacity – holding the same amount of hot water as an equivalent capacity cylinder. Be aware, our direct cylinders are heated via an electric immersion and do not work with gas, oil, or heat pump systems.

If you would like more information on choosing the correct hot water cylinder for your needs please click the following link - Choosing The Correct Hot Water Cylinder