Grid
List
1' TANK REDUCER
1" TANK REDUCER
25mm reducer
ANGLED FILL POINT KIT
ANGLED FILL POINT KIT
The angled fuel tank fill point, which comes with a mounting bracket and drip cap, enables the filling of large tanks to be a simple and easy process. As they are installed into the tank, these fill points are commonly purchased by tank manufacturers.
This 2' female threaded fill point is comprised of a non return valve, a four hole mounting bracket designed to fit on...
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
This kit includes practically everything you need to connect your heating oil tank to the supply pipe.
Includes the following:
Isolation ball valve
52 micron disposable nylon filter element
10mm copper compression fitting outlet
1" male BSPT tank fitting adaptor
Roll of PTFE tape
BUND WARNING ALARM
BUND WARNING ALARM
This clever 9v battery powered Bund Warning Alarm allows you to check for the presence of liquid inside the bunded area of your oil tank on demand eg. as a result of condensation, tank leaks or in the case of overfill.
This allows you to make timely arrangements for the removal of any surplus liquid from the bunded area, thereby maintaining the integrity of your oil tank.
CLEANFILL OVERFILL CONTROL ANTI-SPILLAGE VALVE
CLEANFILL OVERFILL CONTROL ANTI-SPILLAGE VALVE
The Cleanfill 2' Overfill Prevention Valve from Lafon can be fitted to a fuel tank as a piece of safety and environmental protection equipment. This overfill protection device can be used on fuel and diesel storage tanks that are filled by gravity flow or a pressure pump system. When the oil tank is full, the valve will close preventing any further...
LRC PROBE
LRC PROBE
This failsafe overfill prevention device, when connected to the LRC Drivers Unit, allows delivery personnel to control refuelling from the tank. Unlike old-fashioned mechanical overfill prevention valves, in the event of system failure, the supply of fuel is discontinued automatically.
Exceeds all applicable overfill prevention requirements and is fully compliant with EN13616.
OFFSET FILL ASSEMBLY COMPLETE
OFFSET FILL ASSEMBLY COMPLETE
2'' offset fill-point which can be used across the range of Titan oil tanks and any other type of plastic oil tank.
This comes complete both gaskets, aluminium locking nut and the offset cap.
OFFSET FILLER CAP
OFFSET FILLER CAP
2'' cap used on the offset fill-point.
This is a standard part right across the Titan range.
Cap can also be purchased as part of a complete offset fill-point (019606).
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Old Style; operated by triangle plastic key - Will fit ALL OLD Bunded Tanks
Comes commplete with hinge
Please Note: These lids are not interchangeable between old & new tanks
SPILLSTOP OVERFILL PREVENTION VALVE
SPILLSTOP OVERFILL PREVENTION VALVE
The SpillStop 2" Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any...
STRAIGHT FILL POINT KIT
STRAIGHT FILL POINT KIT
Fuel tank fill points are designed to allow the easy filling of large static tanks from ground level or from a remote location. These fill points are designed primarily for tank manufacturers and custom fabricators, and come complete with mounting brackets and drip caps.
Terminating in a 2' male thread, the straight fuel tank fill point is made up of a four hole wall/cabinet...
TITAN 1/2'' BALL VALVE
TITAN 1/2'' BALL VALVE
This ball valve can be used across the entire Titan tank range. (1/2'' connection for tank pack)
Top Outlet valve for Oil Tanks
Top Outlet Valve for Bunded Oil Tanks
Comes supplied with:
Flexible suction pipe and float
Red valve lever
Oil supply connection for pipe
Return inlet connection (if required)
Connection Dia. 3/8” to take 6/8/10mm pipework