Grid
List
19'' Retrofit Green Screw Cap
19'' RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
Replacement keys For FuelMaster (Pack Of 2)
Replacement keys For FuelMaster (Pack Of 2)
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Old Style; operated by triangle plastic key - Will fit ALL OLD Bunded Tanks
Comes commplete with hinge
Please Note: These lids are not interchangeable between old & new tanks
Top Outlet valve for Oil Tanks
Top Outlet Valve for Bunded Oil Tanks
Comes supplied with:
Flexible suction pipe and float
Red valve lever
Oil supply connection for pipe
Return inlet connection (if required)
Connection Dia. 3/8” to take 6/8/10mm pipework
4" LOCKABLE OIL TANK LID
4" LOCKABLE OIL TANK LID
4" Lockable Oil Tank Inspection Cap in oil resistant polymer. Suitable for retrofit to Harlequin tanks incorporating an existing 4" Inspection Aperture and Screw Cap. Accepts key or combination padlocks providing a visible deterrent against fuel theft.
Supplied complete with:
4" Cap and brackets
Self tapping screws
Dipstick attachment...
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin)
The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16" lid (approx. dimension) - ATLAS bunded oil tanks only.
16" diameter manhole lid 'Quarter Turn' style Manhole Access Point.
Supplied complete with:
Lockable Plastic Manhole Lid
Retention Ring
Weatherproof Gasket
Fits Older Atlas and Titan Bunded Tanks.
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks
Comes complete with hinge
Please Note: These lids are not interchangeable between old & new tanks
Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Fits onto the tank inspection point/inlet.
Fits all Atlas Single Skin and Bunded Tanks
FUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK
(Comes with 2 keys)
Lock for all Titan FuelMaster and TruckMaster tanks.
LID LOCKING STUD
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
LOCKING LOOP & NUT
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP
This part was Green on most tanks when first produced - screws into place.
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16'' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16" (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks.
Old style red arm hinged lid.
Titan 19 inch Oil Tank Lid
TITAN 19'' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24''??OIL TANK LID
TITAN 24'' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
Titan Oil Tank 2 inch Vent Cap
TITAN OIL TANK 2'' VENT CAP
Replacement 2'' vent cap for TITAN oil tanks only.
TITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP
Replacement cap for TITAN oil tanks only.
Fits onto the tank inspection point/inlet (new style).
TruckMaster Shackle
TruckMaster Shackle
For use with the TruckMaster 430 and the TruckMaster 900
4 x shackles are needed - please order 4 no. for a complete set.