Kingspan Parts
Grid
List
110MM BLANKING CAP
110MM BLANKING CAP
PVC Plastic Closing Cap To suit standard sewage piping
BIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA
Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media.
The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
This Secoh JDK Connector is for all models from 60 - 120.
It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-Pressure Relief Valve (150-500)
This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged.
Original Black Rubber 90 Degree Hose
2 x Spring Clip Retainers
Setting 0.25 bar
Weight 0.5
19mm ID
21mm...
SECOH JDK-S-40 SINGLE SERIES BLOWER
SECOH JDK-S-40 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
If you need a full set of clips, order x4 clips.
These clips match the blower housing on the below link : -
Kingspan Parts Blower Housing (Complete)
PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm)
To allow connection of the PPFDS pipework into the Control Panel
TruckMaster Shackle
TruckMaster Shackle
For use with the TruckMaster 430 and the TruckMaster 900
4 x shackles are needed - please order 4 no. for a complete set.
4 " ACTIVATED CARBON VENT FILTER
4" ACTIVATED CARBON VENT FILTER
This activated carbon vent filter can remove offensive odours such as hydrogen sulphide as they exit the sewer pipe network through vent pipes. This filter will eliminate these unpleasant odours.
Odours from the sewer pipe network and septic tanks are frequent but often a random nuisance problem in home, work or elsewhere. All sewer pipe networks and septic...
4" POLYAIR REPLACEMENT CARBON PELLETS
POLYAIR REPLACEMENT CARBON PELLETS
To prevent an odour problem or remove the odour install a activated carbon vent filter. If the odour is returning, the carbon will need to be replaced.
The activated carbon vent filter is designed to fit your existing sewer vent pipe. The standard unit will fit the most common 4" / 110mm sewer vent pipe. Also comes in a 6" / 150mm option.
To buy...
3/4' X 1' ANGLE TUNDISH FUNNEL
3/4" X 1" ANGLE TUNDISH FUNNEL
Tundish valve for rainwater direct systems
DIVATRONIX / GRUNDFOS MESH FILTER & MANIFOLD
DIVATRONIX MESH FILTER & MANIFOLD
This filter is used to help reduce/eliminate any forgien objects entering the grey water system.
PVC Pipe threaded with:
1 1/4" ID
1 1/2" OD
Envireau Leaf Filter
Envireau Leaf Filter (Neck-of-tank-Black-box)
This leaf filter can be fitted to any standard rainwater inlet
Material: Polypropolane
Colour: Black
Contains a mesh grill to stop particals entering the water
Dims: 440mm L x 340mm H x 160mm W
Comes complete with removable lid
INLINE FILTER 3/4' FOR ENVIREAU
INLINE FILTER 3/4" FOR ENVIREAU
Used for: Kingspan Water Envireau.
This is a 150 micron filter which filters water before it reaches pressure transducer.
MULTIGO MESH FILTER AND MANIFOLD
MULTIGO MESH FILTER AND MANIFOLD
This filter is used to help reduce/eliminate any forgien objects entering the grey water system.
PVC Pipe threaded with:
1" ID
1 1/4" OD
RAINWATER PUMP MESH FILTER
RAINWATER PUMP MESH FILTER
200 micron steel mesh filter to fit Divatronix Manifold (part code: 0019288), to fit Ebara Multigo Pump ( Product Code: 0012115)
10' INLINE FITER CARTRIDGE, 5 MICRON
5 Poly Micron 10" White Cartridge Filter
5 Poly Micron 10 inch white cartridge filter for Rain Water UV system unit's.
1 1/2' Inline Filter
1 1/2" Inline Filter
1 1/2 inch Inline filter for larger Rainwater units
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
EBARA IDROGO AUTO PUMP
EBARA IDROGO AUTO PUMP
The IDROGO M 40/08 is a 5" submersible centrifugal multistage pump made of stainless steel AISI 304.
APPLICATIONS
Moving clear water from wells & cisterns.
Pressure boosting domestic plants
Small-sale irrigation
Rainwater Harvesting
Washing vehicles
General pressure increases
TECHNICAL DETAILS
Equipped with twin mechanical seal...
EBARA MULTIGO PUMP M40/08
EBARA MULTIGO PUMP M40/08
This is a Multigo 40/08 Vertical multistage centrifugal electric pump (AISI 304)
APPLICATIONS
• Flooded areas
• Boosting of hydraulic plants
• Fountains
• Rainwater Harvesting
• Allotments & Gardens
TECHNICAL DETAILS
• Quiet & Reliable
• Moving water cools the motor
• Durability ensured by interposed...
ET-60 CHARLES AUSTEN BLOWER
ET-60 CHARLES AUSTEN BLOWER
The Charles Austen ET60 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 60.0 l/min (0.12 bar)
Max Pressure: 0.17 Bar
Connector Size: 18mm
Green...
RAINWATER CABLE KIT - 20M
SENSOR DEPTH PROBE 20M
Used for: Kingspan Water Envireau.
This is the 20 metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Rainwater Control & Display panels sold on this site :-
Klargester Rainwater Supply Control Panel
Klargester Rainwater Display Panel
RAINWATER DISPLAY PANEL
RAINWATER DISPLAY PANEL
This Sensor display panel can be used with both Kingspan Water Envireau and Biotec models.
RAINWATER SUPPLY CONTROL PANEL
RAINWATER SUPPLY CONTROL PANEL
Typically located above the stop tap of the incoming harvested water main, the control panel monitors the level of water in the tank and controls the starting and stopping of the pump in the Klargester Envireau Rainwater Harvesting System.
SENSOR DEPTH PROBE 50M
SENSOR DEPTH PROBE 50M
Used for: Kingspan Water Envireau.
This is the 50 metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Sensor Display Panel and Sensor Control panels sold on this site.
Can take up to 10 working days to deliver (made to order)
SOLENOID VALVE DIRECT & OVERFLOW
SOLENOID VALVE DIRECT & OVERFLOW
This is a Solenoid valve used for a Kingpspan Envireau rainwater harvesting system. Sirai 3/4" Solenoid Valve. Normally OPEN Energise to CLOSE, including MPM CONNECTOR. For Multi-user systems.
19'' Retrofit Green Screw Cap
19'' RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin)
The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16" lid (approx. dimension) - ATLAS bunded oil tanks only.
16" diameter manhole lid 'Quarter Turn' style Manhole Access Point.
Supplied complete with:
Lockable Plastic Manhole Lid
Retention Ring
Weatherproof Gasket
Fits Older Atlas and Titan Bunded Tanks.
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks
Comes complete with hinge
Please Note: These lids are not interchangeable between old & new tanks
Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Fits onto the tank inspection point/inlet.
Fits all Atlas Single Skin and Bunded Tanks
FUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK
(Comes with 2 keys)
Lock for all Titan FuelMaster and TruckMaster tanks.
LID LOCKING STUD
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
LOCKING LOOP & NUT
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP
This part was Green on most tanks when first produced - screws into place.
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16'' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16" (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks.
Old style red arm hinged lid.
Titan 19 inch Oil Tank Lid
TITAN 19'' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24''??OIL TANK LID
TITAN 24'' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
Titan Oil Tank 2 inch Vent Cap
TITAN OIL TANK 2'' VENT CAP
Replacement 2'' vent cap for TITAN oil tanks only.
TITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP
Replacement cap for TITAN oil tanks only.
Fits onto the tank inspection point/inlet (new style).
COALESCER LIFTING CHAIN KIT .5m
COALESCER LIFTING CHAIN KIT FOR SALE
1/2' HOSE CLEAR BRAIDED per metre
1/2' Clear Braided Hose SOLD PER METRE
BioTec P4 to P25 and Airflow 1 to 4.
This is a 1/2 inch clear reinforced hose which can also be used to connect the airlift to the manifold within BioTec P40 and Airflow AF5 upwards.
Sold as a continual length
Non-returnable once ordered and cut
1120mm BA/BB BIODISC BELT (post 2006)
1120mm BA/BB BIODISC BELT (post 2006)
Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured post 2006.
160mm RUBBER GROMMET
160MM RUBBER GROMMET
1600mm BA/BB BIODISC BELT (pre 2006)
1600mm BA/BB BIODISC BELT (pre 2006)
Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured pre 2006
