Kingspan Parts
Grid
List
20mm x 3/4 BSP Female Adapter
3/4 BSP FEMALE ADAPTER X 20MM
This adapter can be used for flexible hoses and suction pipes.
The adaper coverts the hose to a BSP thread so that it can be attached to pumps, tank and equipment.
The size refers to the inside diameter of the pipe
3/4' HOSE CLEAR BRAIDED per metre
3/4'' HOSE CLEAR BRAIDED per metre
3/4'' Clear Braided hose which can be used to connect airlift to manifold within BioTec P40 and Airflow AF5 upwards.
3 UF CAPACITOR FOR PANISONIC MOTOR
3 UF CAPACITOR FOR PANISONIC MOTOR
3UF Capacitor which suits the Panasonic Motor Gearbox ( Klargester BA/BA-X/BB Biodisc Panasonic Motor Gearbox )
3.15 AMP FUSE FOR GREEN PANEL
3.15 AMP FUSE FOR GREEN PANEL
3.15amp Motor-Blower fuse for the Small Green Control Panel.
3 POLE ISOLATOR SWITCH
3 POLE ISOLATOR SWITCH
3 Pole Non Fused lockable Isolator Switch with high impact grey polycarbonate enclosure, UV stabilised to IP66/67, Complete with 1no fuse block
5 AMP FUSE FOR GREEN PANEL
5 AMP FUSE FOR GREEN PANEL
5amp Motor-Blower fuse for the small Green Control Panel.
ANTI-ROTATION WASHER
ANTI-ROTATION WASHER
Anti-rotation washer fitted to all Biodisc and Biotec lid locks
AIR LINE REGULATING VALVE 3/4'
AIR LINE REGULATING VALVE 3/4"
3/4 inch airline valve for P18 to P25 unit's
AIR LINE REGULATING VALVE 1/2'
AIRLINE REGULATING VALVE 1/2"
1/2 inch airline valve for P6 to P12 unit's
BA-BC BIODISC SMART ALARM KIT
BA-BC Biodisc Smart Alarm kit
Suitable for lots of unit's that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also a small discharge pump or Air-blower can be wired into this panel.
Kit Includes :-
Control Panel
Low Voltage Beacon
High Level Float Switch
Lose of Rotation
BIODISC BA-BB CHAIN CONVERSION KIT
BA-BB CHAIN CONVERSION KIT
This Kit is to convert a Belt Drive BA-BB unit to Chain Drive
BIODISC BA-BD DOSING BUCKET
BA-BD DOSING BUCKET
The Klargester BA/BA-X/BB BC-BD Dosing Cup is suitable for Klargester BioDisc sewage treatment systems, and works by distributing the effluent over the media discs to aid treatment.
BIODISC BA/BB BEARING KIT
BIODISC BA/BB BEARING KIT
Full BA-BB BioDisc Bearing Replacement Kit.
INCLUDES :
0600038 - 1/2 Nylon Drive End Bearing
0600079 - Whole Drive End Bearing
0600039 - Retaining Plate
0303328 - Bearring Retaining Plate
0303464 - Metal Backing Plate
BIODISC BA/BB BEARING RETAINING PLATE
BIODISC BA/BB BEARING RETAINING PLATE
Half nylon bearing retaining plate for non-drive end on Klargester BioDisc BA/BB/BAX units.
BIODISC BA/BB EXTERNAL MOTOR CAPACITOR KIT
BIODISC BA/BB EXTERNAL MOTOR CAPACITOR KIT
The Klargester sewage treatment system BA/BA-X/BB BioDisc external Motor Capacitor Kit is suitable for the Klargester BA/BB BioDisc sewage treatment systems. The Kit is to be used alongside the post October 2007 green control panel.
This has a capacitor housed inside, so if you purchase a new Panasonic Motor/gearbox and you do not have a capacitor...
.png)
Panasonic Gearbox / Motor, FREE TOP PULLEY*(*worth 35.74 ex VAT) & Free delivery
Klargester BA/BA-X/BB BioDisc Panasonic Motor / Gearbox
The Klargester Biodics motor/ gearbox by Panasonic is a genuine Klargester Biodisc spare part for the BA/ BA-X/ BB Biodisc sewage treatment plant.
This motor / gearbox is a direct replacement for the Vipa Motor Gearbox.
The Fully enclosed spare part for the Klargester Biodisc Sewage Treatment Plant is grease filled for smooth operation,...
BIODISC BA/BB PULLEY LOCKING ELEMENT
BIODISC BA/BB PULLEY LOCKING ELEMENT
BA/BB Pulley locking element
BIODISC BA/BB NYLON HALF BEARING
BIODISC BA/BB NYLON HALF BEARING
Klargester half bearing to fit the non-drive end of a Klargester BioDisc BA/BB Sewage Treatment System.
BIODISC BA/BB SEWAGE TREATMENT PLANT TOP PULLEY
BIODISC BA/BB SEWAGE TREATMENT PLANT TOP PULLEY
Top pulley to suit Klargester BA, BB BioDisc Sewage Treatment Systems.
BIODISC BA/BB WHOLE BEARING
BIODISC BA/BB WHOLE BEARING
A complete, one piece nylon bearing to suit the drive end of the Klargester BioDisc Ba, BA-X and BB Sewage Treatment Plants.
BC Top Pulley for Sewage Treatment Plant
Top Pulley for BC BioDisc Sewage Treatment Plant
Top Pulley suitable for the motor shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant
24 Teeth
8mm Pitch
H7 Tolerence
30mm Wide High Torque Drive Pulley
Bored 18mm
6mm Grubscrew hole above keyway centrally in tooth Face
6mm Grubscrew Supplied
British Standard Keyway
BA/BB BioDisc Bottom Pulley
BA/BB BioDisc Bottom Pulley
Bottom pulley to suit the Klargester BA, BA-X and BB BioDisc Sewage Treatment Systems.
Bottom Pulley suitable for the shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant
80 Teeth
8mm Pitch
20mm Wide High Torque Drive Pulley
Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when...
Biodisc Hinge
Biodisc Hinge
Black hinge with 4no 6mm countersunk holes to suit our Kingspan / Klargester Biodisc Sewage treatment plants
Width 50mm
Height 75mm
Depth 4mm
BIODISC DRIVE ASSEMBLY FOR BA/BB (post 2006 tanks)
BIODISC DRIVE ASSEMBLY FOR BA/BB (post 2006 tanks)
This is for the Post 2006 Models of the BA/BB Bio Disc. This is a basic drive assembly kit which includes the motor, capacitor belt & top pulley. If you also require the bottom pulley & locking element along with all these parts see below link :-
Kingspan Parts BA-BB BioDisc Drive Assembly Kit 3 (Post 2006 models)
The BA-BB Bio Disc...
BIODISC DRIVE ASSEMBLY FOR BA/BB (pre 2006 tanks)
BIODISC DRIVE ASSEMBLY FOR BA/BB (pre 2006 tanks)
Klargester Biodisc Sewage Treatment Plant motor / gearbox drive assembly for tanks brought before 2006, where the motor is placed high to the left, inside the tank.
Includes:
Motor/ Gearbox (0015500)
Long 1600mm Belt (0010787)
Top Pulley (0013725)
BIODISC DRIVE ASSEMBLY KIT 4 FOR BA-BB (PRE 2006 MODELS)
BIODISC DRIVE ASSEMBLY KIT 4 FOR BA-BB (PRE 2006 MODELS)
This is for the Pre 2006 Models of the BA/BB Bio Disc. This is a full drive assemlbly replacement kit including the motor, capacitor, belt, both pulleys & locking element.
The BA-BB Bio Disc Drive Assembly Kit 4 includes :-
1 x Panasonic Motor-Gearbox - 0015500
1 x Long 1600mm Belt - 0012828
1 x Top Pulley - 0013725
1 x...
ENKAMAT NETTING (1M)
Enkamat Netting
Enkamat netting is to be used on the media bale in the Sewage Treatment Plants to prevent large contaminants from getting into the media core.
2m is recommended to replace existing Enkamat
Thickness: Approx. 10mm
Greasomatic Cartridge (Multi Purpose)
Greasomatic Cartridge (Multi Purpose)
This is a pre-charged autogreaser which screws into a grease nipple socket or additional lubrication point and discharge 120ml of lubricant in a controlled continuous flow. It is one of the most effective alternatives to manual lubrication.
The grease cartridge has 7 different settings allowing you to set effiently depending on your application. Operates...
Grease Cartridge (Chain Type)
Grease Cartridge (Chain Type)
This is a pre-charged autogreaser which fits onto the chain guard to supply grease to the drive chain on BioDisc units BD, BE and BF. It is one of the most effective alternatives to manual lubrication.
The grease cartridge has 7 different settings allowing you to set effiently depending on your application. Operates under a wide temperature range and can be installed...
BIODISC PERIPHERAL DRIVE ROLLER KIT
BIODISC PERIPHERAL DRIVE ROLLER KIT
This complete set of 12 peripheral drive rollers including nuts, bolts and washers, can be used in conjunction with the Klargester biodisc FA, FB and FC Sewage Treatment Systems.
BA COVER (BIODISC)
BA COVER (BIODISC)
Cover/Lid for Biodisc BA-BB-BAX comes complete with 2 x Locks.
Materials: Glass Reinforced Plastic (GRP) with a cloloured Gel Coat Weather Exterior.
BIODISC LOSS OF ROTATION KIT
BIODISC LOSS OF ROTATION KIT
The Klargester (Kingspan) loss of rotation alarm is suitable for all Klargester gravity BioDiscs. This kit will help you to identify if the discs are failing to rotate and then determine if you need to arrange servicing of your BioDisc system.
BIOFICIENT CLP6 SPANNER KEY
BIOFICIENT CLP6 SPANNER KEY
CLP6 Spanner Key
BLOWER HOUSING (COMPLETE)
Plastic Blower Housing - Complete Unit.
Suitable for P006 - P025 BioTec units.
Contains : -
1no x 0701007 - Blower Housing Lid
1no x 0701008 - Blower Housing Base
4no x 0701009 - Blower Housing Clips.
Please note that if you have the old style of blower housing which needs screwed down, you will need to replace it with the new housing unit.
BIOSAFE KEY
BIOSAFE KEY
Keys used for Biosafe Tanks
BH BJ MOTOR GEARBOX BAUER
BH BJ MOTOR GEARBOX BAUER
Klargester BH BJ Motor Gearbox for BH BJ sewage treatment plant with keyway shaft
BLOWER HOUSING BASE
BLOWER HOUSING BASE
Base for blower housing - this base is only suitable for the version of the blower housing which clips down. If you have a screw down base you will need a new blower housing complete.
Dimensions are in the technical drawings.
BRUSH FITMENT
Brush Fitment
Brush Fitment for BD to BG Grease Kits
Diaphragm Set EL150 or EL250
Diaphragm Set EL150 or EL250
This Diaphragm Kit is suitable for Secoh EL (JDK) Blowers.
This kit contains:
2 EL diaphragms plus their plastic surrounding frame & 4 magnetic spacers to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
The SE24 Diaphragm Kit is suitable for Secoh JDK 60-120 Blowers, including:
JDK-S-60
JDK-60C
JDK-S-80
JDK-80C
JDK-S-100
JDK-100C
JDK-S-120
JDK-120C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part...
Diaphragm Kit for Secoh EL60 / EL80 / EL100
Diaphragm Kit for Secoh EL60 / EL80 / EL100
This Diaphragm Set is suitable for Secoh EL Blowers ( EL 60 / EL80 & EL100)
This kit contains:
2 EL diaphragms plus the plastic surrounding frame & 4 spacer strips to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Diaphragm Kit for Secoh EL-60N
Diaphragm Kit for Secoh EL-60N
The SE60D Diaphragm Kit is suitable for Secoh EL-60N Blowers.
This kit contains:
2x EL diaphragms plus their plastic surrounding frame
4x spacer strips to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
DRY GUARD BA/BB/BC BIODISC
DRY GUARD BA/BB/BC BIODISC
The dry guard fits to the gearbox support beam and protects the pulley system from water ingress.
Suits BA ,BB & BC BioDisc's
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-40 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-60 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-80 CHARLES AUSTEN BLOWER
ET-80 CHARLES AUSTEN BLOWER
The Charles Austen ET80 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 80.0 l/min (0.12 bar)
Max Pressure: 0.10 Bar
Connector Size:...
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-100 CHARLES AUSTEN BLOWER
ET-100 CHARLES AUSTEN BLOWER
The Charles Austen ET100 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 100.0 l/min
Max Pressure: 0.10 Bar
Connector Size: 18mm
Green...