Featured Products
Panasonic Gearbox / Motor, FREE TOP PULLEY*(*worth 35.74 ex VAT) & Free delivery
(€344.34 inc VAT)
Klargester BA/BA-X/BB BioDisc Panasonic Motor / Gearbox
The Klargester Biodics motor/ gearbox by Panasonic is a genuine Klargester Biodisc spare part for the BA/ BA-X/ BB Biodisc sewage treatment plant.
This motor / gearbox is a direct replacement for the Vipa Motor Gearbox.
The Fully enclosed spare part for the Klargester Biodisc Sewage Treatment Plant is grease filled for smooth operation,...
from €279.95 ex VAT (€344.34 inc VAT)
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
€POA
GRP Kit / Fibreglass Repair Kit (2m)
(€145.62 inc VAT)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
€118.39 ex VAT (€145.62 inc VAT)
ALTECNIC ACETAL TUNDISH 15x20mm
ALTECNIC ACETAL TUNDISH 15x20mm, ANTI-SPLASH DESIGN
Used on unvented domestic heating systems, the open funnel offers visibility of system discharge, due to a fault condition within the heating system. Featuring the new improved anti-splash design, preventing damage to carpets and flooring
Suitable for most unvented cylinders including Ultrasteel, Tribune HE, RM, Megaflo, ThermaQ cylinders
Specification:
Engineering...
PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm)
To allow connection of the PPFDS pipework into the Control Panel
Calpeda MXH 803A Water Pump Max 36m Head 216L/Min
Calpeda MXH 803A Water Pump Max 36m Head 216L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
EBARA MULTIGO PUMP M40/08
EBARA MULTIGO PUMP M40/08
This is a Multigo 40/08 Vertical multistage centrifugal electric pump (AISI 304)
APPLICATIONS
• Flooded areas
• Boosting of hydraulic plants
• Fountains
• Rainwater Harvesting
• Allotments & Gardens
TECHNICAL DETAILS
• Quiet & Reliable
• Moving water cools the motor
• Durability ensured by interposed...
TRUCKMASTER 900 CLOCK GAUGE
TRUCKMASTER 900 CLOCK GAUGE
Clock gauge for TruckMaster 900
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
1/2' STAINLESS STEEL THERMOSTAT POCKET
1/2 inch BSBT Stainless Steel Thermostat Pocket
Range – Stainless Steel Thermostat Pocket
1/2″ Thread
100mm in length
Compatible with:
Range Tribune HE (Caleffi Control) Cylinders
Range Tribune HE 2 (RWC Control) Cylinders
1120mm BA/BB BIODISC BELT (post 2006)
1120mm BA/BB BIODISC BELT (post 2006)
Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured post 2006.
10 HOLE DISTRIBUTION BOX
10 HOLE DISTRIBUTION BOX
The 10 Hole Distribution Box is the most versatile box on the market today. You can choose what height of distribution boxes you want your inlets and outlet slotted filters to be. It also comes compete with the only seal on the market of distribution boxes that accepts 2', 3', 4' and corrugated pipe. No more different fittings in distribution boxes to inventory!...
ZABEL A1801 EFFLUENT FILTER
ZABEL A1801 EFFLUENT FILTER
Like the PL-68, this effluent filter is designed for residential applications. The effluent cartridge design allows for easy installation and maintenance and fits inside a standard 4″ tee with down leg pipe. It can easily be retrofitted into an existing septic tank. With 1.6mm filtration this filter comes with a built in gas deflector. It is designed for flows of...
6 METRE HOSE KIT
6m HOSE KIT
Supplied with swaged fittings, swivel nozzle and 1" lever valve
DIS:SOLV SEPTIC TANK LIQUID 1LITRE
Dis:Solv Septic tank liquid is a specialised biological treatment for degrading organic matter in waste water systems to help accelerate the breakdown of organic matter, retain mobility and reduce unpleasant orders.
Unblocks & Deodorizes
No need for hazardous chemicals
No damage to drain walls or bonding
Reduces BODs, CODs and TSSs
Cost effective
Instructions for use:
Add...
TruckMaster Shackle
TruckMaster Shackle
For use with the TruckMaster 430 and the TruckMaster 900
4 x shackles are needed - please order 4 no. for a complete set.
SOLAR CLEANER FLUID 500ML
SOLAR CLEANER FLUID 500ML
Solar Cleaner is a concentrated universal cleaner specifically designed for solar thermal systems, by removing degraded solar heat transfer fluids, sludge and blockages. This product rapidly restores efficiency to existing solar thermal systems.
Fernox Solar Cleaner is compatible for use with all materials commonly used in solar thermal installations.
A concentrated...
BB / BA-XÂ Â BioDisc Shaft (Klargester)
BB / BA-X BioDisc Shaft (Klargester)
Shaft only to suit Klargester BB, BA-X Range
SECOH JDK-S-250 SINGLE SERIES BLOWER (EL-250)
SECOH JDK-S-250 SINGLE SERIES BLOWER (EL-250)
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated...
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no
This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820
Comes as a pair of 2no
APOLLO STANDARD WATER GAUGE
APOLLO STANDARD WATER GAUGE
Apollo Ultrasonic is the original ultrasonic water tank contents gauge and comprises a tank mounted transmitter unit and a plug in receiver unit.
The transmitter monitors the level of water inside the tank and relays this data via a secure, wireless connection to the receiver unit, which cleverly and conveniently plugs into a standard electrical socket. The receiver...
PIPE DIFFUSER 65MM X 400MM
PIPE DIFFUSER 65MM X 400MM
For Biosafe 1 and Delta 1 tanks
3 METRE HOSE KIT
3m HOSE KIT
Supplied with swaged fittings, swivel nozzle and 1'' lever valve
Calpeda MXH 805B Water Pump Max 60m Head 216L/Min
Calpeda MXH 805B Water Pump Max 60m Head 216L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
BUND WARNING ALARM
BUND WARNING ALARM
This clever 9v battery powered Bund Warning Alarm allows you to check for the presence of liquid inside the bunded area of your oil tank on demand eg. as a result of condensation, tank leaks or in the case of overfill.
This allows you to make timely arrangements for the removal of any surplus liquid from the bunded area, thereby maintaining the integrity of your oil tank.
JDK 150-500 Filter
JDK 150-500 Filter
JDK 150-500 Filter - to suit Secoh JDK Blowers from 150 to 500 range
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
EFFLUENT FILTER PL625
PL625 EFFLUENT FILTER
The PL-625 effluent filter is designed for residential waste flows up to 38,000 litres per day. It has 625 linear feet of 1/32' filter slots. It is design to fit a septic tank or treatment system outlet pipe. The PL-625 effluent filter is unique in design with an automatic shut off ball installed with every filter. When the filter is element is removed for servicing the...
GROZ WATER AND PARTICLE CARTRIDGE
GROZ WATER AND PARTICLE CARTRIDGE
This water and particle paper cartridge with a drain port for easy removal of filtered impurities. Primarily used in gravity systems but also suitable for low flow pump installations.
Specification:-
Suitable for diesel, petrol and B20
Gravity Flow or Lo Flow Pump
10 micron
Max flow rate 60 lpm
Max bar 3.5
ACETAL TUNDISH 15MM INLET/22M OUTLET
Acetal Tundish 15mm inlet/22m outlet
This tundish has been tested and found to comply with the requirements of the Water Supply Fittings Regulations 1999 for England and Wales, the Water Byelaws 2014, Scotland and the Water Regulations, Northern Ireland.
This Acetal Tundish safety aid on your hot water system will give you visual indictation of any leakage from the cylinder, indicating a higher...
110MM BLANKING CAP
110MM BLANKING CAP
PVC Plastic Closing Cap To suit standard sewage piping
ET-150 Charles Austen Blower service kit
The ET-150 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
PIUSI LINE FILTER
PIUSI LINE FILTER
The Piusi Line Filter is designed to protect the inlet side of a pumping installation with its washable, removable wire mesh filter element and flanged connections. However, this particle fuel filter also helps to change the inlet/outlet orientation, reduce the obstruction size of a 90?_ connection and act as a spillback device/line priming device to reduce system pressure. The...
PIUSI HOSE REEL 3/4 inch
PIUSI HOSE REEL 3/4''
Hose reel for diesel and oil supply hoses.
Through careful design, Piusi have been able to limit pressure loss and facilitate use in this hose reel, even for high flow pumps like diesel refuelling systems.
Features:
Reduced pressure loss through the proper sizing of the hydraulic system
Protective latch mechanism that prevents accidental contact with...
Calpeda GXV 25-6 Submersible Dirty Water Pump
Calpeda GXV 25-6 Submersible Dirty Water Pump
The Calpeda GXV range is a submersible dirty water and drainage pump made from stainless steel with a vertical delivery port. Minimum dimension and high levels of performance, for use in many different applications, head up to 6m and flow rates up to 170 Litres/min
Calpeda GXV Submersible dirty water Pumps can be used for the following applications:
For...
2.1 Bar Inlet Control
2.1 Bar Inlet Control
Caleffi Inlet Control Monobloc Valve 22mm - a pressure reducing valve, a pressure relief valve a check valve and filter all included in a single monobloc valve. These Caleffi inlet control units are designed to control the pressure on the mains supply of an unvented hot water cylinder.
BIODISC BA-BD DOSING BUCKET
BA-BD DOSING BUCKET
The Klargester BA/BA-X/BB BC-BD Dosing Cup is suitable for Klargester BioDisc sewage treatment systems, and works by distributing the effluent over the media discs to aid treatment.
Biodisc Hinge
Biodisc Hinge
Black hinge with 4no 6mm countersunk holes to suit our Kingspan / Klargester Biodisc Sewage treatment plants
Width 50mm
Height 75mm
Depth 4mm
RAINWATER SUPPLY CONTROL PANEL
RAINWATER SUPPLY CONTROL PANEL
Typically located above the stop tap of the incoming harvested water main, the control panel monitors the level of water in the tank and controls the starting and stopping of the pump in the Klargester Envireau Rainwater Harvesting System.
TRUCKMASTER 430 CLOCK GAUGE
TRUCKMASTER 430 CLOCK GAUGE
Clock gauge for TruckMaster 430
20mm x 3/4 BSP Female Adapter
3/4 BSP FEMALE ADAPTER X 20MM
This adapter can be used for flexible hoses and suction pipes.
The adaper coverts the hose to a BSP thread so that it can be attached to pumps, tank and equipment.
The size refers to the inside diameter of the pipe
EFFLUENT FILTER PL122
PL122 EFFLUENT FILTER
The PL122 effluent filter was the original filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. The PL-122 effluent filter is designed for residential waste flows...
WATER SEPARATOR 70-30 FUEL CARTRIDGE
WATER SEPARATOR 70-30 DIRT FUEL CARTRIDGE
Max 60 L/M with 1" ports
The delivery fuel replacement cartridge is a water absorbing cartridge.
These fuel filters guarantee the fundamental protection of motors using fuel station dispensing diesel.
The absorbtion of water, however gradual, causes a reduction in filtering capacity.
Calpeda Meta Small Variable Speed Booster Twin Pump
Calpeda Meta Variable Speed Booster Twin Pump
This pressure boosting pump is a self priming booster set with a built-in frequency converter. The Meta booster pump is a plug and play solution with the booster pump equipped with an integrated pressure transducer, an integrated check valve and a built-in pressure vessel. The VSD controls the start and stop of the pump and allows to keep a constant...
Calpeda MXH 206C Water Pump Max 68.5m Head 80L/Min
Calpeda MXH 206C Water Pump Max 68.5m Head 80L/Min
These clean water horizontal multi-stage centrifugal pumps with stainless steel impellers are suitable for water supply, for clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request). This range of water pumps are universal pump, for domestic use, for civil and industrial applications,...
PROTECTOR F1 EXPRESS 400ML
PROTECTOR F1 EXPRESS 400ML
Protector F1 is the market leading inhibitor which prevents corrosion and limescale formation in central heating systems. This high performance product offers superior protection by uniquely combining three inhibitors of organic particles, which bind to the metal within the heating system to protect from debris alongside anodic inhibitors which react with the system’s...
Grease Cartridge (Chain Type)
Grease Cartridge (Chain Type)
This is a pre-charged autogreaser which fits onto the chain guard to supply grease to the drive chain on BioDisc units BD, BE and BF. It is one of the most effective alternatives to manual lubrication.
The grease cartridge has 7 different settings allowing you to set effiently depending on your application. Operates under a wide temperature range and can be installed...
ET-200 Charles Austen Blower
ET-200 Charles Austen Blower
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
BIODISC BA-BB CHAIN CONVERSION KIT
BA-BB CHAIN CONVERSION KIT
This Kit is to convert a Belt Drive BA-BB unit to Chain Drive
Calpeda Meta Variable Speed Booster Twin Pump
Calpeda Meta Variable Speed Booster Twin Pump
This pressure boosting pump is a self priming booster set with a built-in frequency converter. The Meta booster pump is a plug and play solution with the booster pump equipped with an integrated pressure transducer, an integrated check valve and a built-in pressure vessel. The VSD controls the start and stop of the pump and allows to keep a constant...
OFFSET FILLER CAP
OFFSET FILLER CAP
2'' cap used on the offset fill-point.
This is a standard part right across the Titan range.
Cap can also be purchased as part of a complete offset fill-point (019606).
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
The SE24 Diaphragm Kit is suitable for Secoh JDK 60-120 Blowers, including:
JDK-S-60
JDK-60C
JDK-S-80
JDK-80C
JDK-S-100
JDK-100C
JDK-S-120
JDK-120C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part...