Grid
List
CORRUGATED PIPE COVER
CORRUGATED PIPE COVER
These flat pipe covers fit the risers and corrugated or ribbed pipe. These covers are made of HDPE with the highest UV Protection on the market today. Each one cover comes with a factory-installed gasket. These covers will withstand normal pedestrian rated applications. This cover can be also used with our 4-5 hole distribution/inspection chamber.
Comes in 12" (300mm),...
FLOW DIVIDER
FLOW DIVIDER
Ideal for alternating or dividing flows between two separate percolation areas or drain fields. Easily installs by attaching directly to 110mm (4″) pipe. The unique channel split design enables an equal split of the waste stream. Additionally the valve can be set for equal distribution or all distribution to the right or left.
EFFLUENT FILTER STATION
EFFLUENT FILTER STATION
The Polylok Effluent Filter Station offers a ‘connect and go’, highly effective, filtration solution that upgrades existing tanks with 1.6mm filtration. A fully assembled solution when existing tanks are inaccessible for filter installation. Simply add after the tank and pre-distribution of wastewater. Installation at outlet of a new or existing septic tank or...
IN-LINE PRESSURE FILTER
IN-LINE PRESSURE FILTER
The Inline pressure filter for use on a pumped outlet septic tank or treatment plant where you want to spread the effluent out as much as possible to ensure you do not clog your media. This filter will act as a second level of filtration and will keep orifice lines clean. This unit is suitable for installation on a pump pipeline after treatment with a max flow of 300 l/min...
POLY-CLEANSE SEPTIC BACTERIA AND ENZYMES
POLY-CLEANSE SEPTIC BACTERIA AND ENZYMES
Poly-Cleanse™ uses a commercial-strength strain of bacteria that helps to maintain your system. Polylok’s Poly-Cleanse™ can be used in many different applications as a chemical-free solution to your problems. This product is for use in Septic Tanks, Cesspools, ATUs, Drainfield/Percolation Areas, Grease Traps, Pump Stations, Sludge Ponds,...
ZABEL A1801 EFFLUENT FILTER
ZABEL A1801 EFFLUENT FILTER
Like the PL-68, this effluent filter is designed for residential applications. The effluent cartridge design allows for easy installation and maintenance and fits inside a standard 4″ tee with down leg pipe. It can easily be retrofitted into an existing septic tank. With 1.6mm filtration this filter comes with a built in gas deflector. It is designed for flows of...
EFFLUENT FILTER PL68 CARTRIDGE WITH HOUSING
PL68 EFFLUENT FILTER CARTRIDGE WITH HOUSING
The PL-68 effluent filter is designed for residential waste flows up to 3,000 litres per day. It has 68 linear feet of 1/16' filter slots. It is designed to fit a septic tank outlet pipe. It can also be fitted with a snap in gas deflector to ensure any gas bubbles are deflected away from the filter. This filter is supplied with the housing.
Specification:-
Offers...
EFFLUENT FILTER PL122
PL122 EFFLUENT FILTER
The PL122 effluent filter was the original filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. The PL-122 effluent filter is designed for residential waste flows...
EFFLUENT FILTER PL250
PL250 EFFLUENT FILTER
The PL250 effluent filter is designed for residential waste flows up to 11,400 litres per day. It has 250 linear feet of 1/16' filter slots. It is designed to fit a septic tank outlet pipe. This filter can be supplied with or without the handle.
Features:-
Flows of up to 3,000 GPD
250' of 1/16' filtration
360 deg of filtration
Cartridge cannot...
EFFLUENT FILTER PL525
PL525 EFFLUENT FILTER
The PL-525 effluent filter is designed for residential waste flows up to 38,000 litres per day. It has 525 linear feet of 1/16' filter slots. It is design to fit a septic tank or treatment system outlet pipe. The PL-525 effluent filter is unique in design with an automatic shut off ball installed with every filter. When the filter is element is removed for servicing the...
EFFLUENT FILTER PL625
PL625 EFFLUENT FILTER
The PL-625 effluent filter is designed for residential waste flows up to 38,000 litres per day. It has 625 linear feet of 1/32' filter slots. It is design to fit a septic tank or treatment system outlet pipe. The PL-625 effluent filter is unique in design with an automatic shut off ball installed with every filter. When the filter is element is removed for servicing the...
COMPACT UV EFFLUENT FILTER
COMPACT UV EFFLUENT FILTER
The Compact UV Effluent Filter is designed with an integrated effluent filter to protect the UV lamp from excess solids. It reduces bacteria levels from secondary effluent. Every component of the compact effluent filter is engineered and constructed to provide reliable disinfection and superior operational life. UV disinfection is routinely used in ecological sensitive...
UV DISINFECTION EFFLUENT FILTER
UV DISINFECTION EFFLUENT FILTER
For a complete solution to meet even the most stringent environmental permit requirements, the PL-UV1 UV Disinfection Unit reduces bacteria levels from secondary effluent to achieve strict water quality standards. The reliability and performance of the PL-UV1 is unmatched for onsite and decentralized treatment applications. Every component of the compact unit is highly...