Featured Products
Smart Control Panel & Beacon Combo
(€491.94 inc VAT)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control...
€482.89 €399.95 ex VAT (€491.94 inc VAT)
EBARA BEST FOUR M SUMP PUMP
(€923.21 inc VAT)
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
€750.58 ex VAT (€923.21 inc VAT)
ET-60 AO Charles Austen Blower
(€164.23 inc VAT)
ET60 AO Charles Austen Blower
The Charles Austen ET60 A is a linear diaphragm air pump with alarm which provides a clean oil free air source.
This 60 litres per minute capacity is suitable for a wide range of applications including
• Septic tank and Sewage Treatment Plant (STP) aeration
• Aquatic oxygenation for fish ponds and aquariums
• Spas / whirlpools
• Water features
...
€133.52 ex VAT (€164.23 inc VAT)
Grid
List
ET-60 CHARLES AUSTEN BLOWER
ET-60 CHARLES AUSTEN BLOWER
The Charles Austen ET60 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 60.0 l/min (0.12 bar)
Max Pressure: 0.17 Bar
Connector Size: 18mm
Green...
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-60 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-80 CHARLES AUSTEN BLOWER
ET-80 CHARLES AUSTEN BLOWER
The Charles Austen ET80 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 80.0 l/min (0.12 bar)
Max Pressure: 0.10 Bar
Connector Size:...
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-100 CHARLES AUSTEN BLOWER
ET-100 CHARLES AUSTEN BLOWER
The Charles Austen ET100 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 100.0 l/min
Max Pressure: 0.10 Bar
Connector Size: 18mm
Green...
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-100 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-120 CHARLES AUSTEN BLOWER
ET-120 CHARLES AUSTEN BLOWER
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key...
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-120 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-150 CHARLES AUSTEN BLOWER
ET-150 CHARLES AUSTEN BLOWER
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key...
ET-150 Charles Austen Blower service kit
The ET-150 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-200 Charles Austen Blower
ET-200 Charles Austen Blower
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
ET-250 Charles Austen Blower
ET-250 Charles Austen Blower
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-250 Charles Austen Blower service kit for the includes:-
4 Diaphragms
1 Filter
16 Valves
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
FLOAT SWITCH FOR HIGH LEVEL ALARM
KLARGESTER FLOAT SWITCH FOR HIGH LEVEL ALARM
The Klargester float switch is used to activate the pump or High Level alarms in pump stations. The float is designed to float on sewage to ensure it triggers the pumps to lower levels in your Sewage Treatment Plant. This float switch is used for Sewage Treatment Plants, Effluent Pump Chambers and High Level Alarms - Comes with 10m cable with and black...
GREEN CONTROL PANEL MOUNTING KIT
GREEN CONTROL PANEL MOUNTING KIT
Stand/Mount for the Small Green Control Panel - Kingspan Green Control Panel E0401K
GRP Kit / Fibreglass Repair Kit (2m)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
BIOSAFE CONTROL PANEL
HIGH LEVEL ALARM (Mid Range)
HIGH LEVEL ALARM KIT (SMART)
HIGH LEVEL ALARM KIT (SMART)
Suitable for lots of unit's that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also a small discharge pump or Air-blower can be wired into this panel.
Kit Includes :-
Control Panel
Low Voltage Beacon
High Level Float Switch
HOSE TAIL ELBOW (3/4 BSP 19MM)
HOSE TAIL ELBOW (3/4 BSP 19MM)
3/4 Hosetail Elbow for BIOTEC airlift unit's for P018-25
HOSE TAIL ELBOW (1/2 BSP 12MM)
Hose Tail Elbow
Hose tail Elbow for Biotec Airlift unit's.
Materials: Blue Tefen Plastic
(1/2 BSP - 12mm)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-Pressure Relief Valve (150-500)
This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged.
Original Black Rubber 90 Degree Hose
2 x Spring Clip Retainers
Setting 0.25 bar
Weight 0.5
19mm ID
21mm...
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
This Secoh JDK Connector is for all models from 60 - 120.
It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
KINGSPAN GREEN CONTROL PANEL E0401K
KINGSPAN GREEN CONTROL PANEL E0401K
This is a small green control panel which includes alarm facilities. If there is a fault with your unit, this panel will indicate the problem with a fault code.
The box is suitable for all BioDisc & BioTec units.
*New Klargester replacement panel click here
KINGSPAN FLASHING ALARM BEACON
KINGSPAN FLASHING ALARM BEACON
Flashing Alarm beacon for Kingspan/Klargester Sewage Treatment Plants
The flashing alarms beacon is suitable for all domestic Kingspan/Klargester BioDisc and Biotec Sewage Treatment Plants.
Please note that this is only suitable for use with the Kingspan/Klargester Green Control Panel
KLARGESTER BA BIODISC SHAFT
KLARGESTER BA BIODISC SHAFT
Complete shaft to suit Klargester BA - 25mm
BB / BA-X BioDisc Shaft (Klargester)
BB / BA-X BioDisc Shaft (Klargester)
Shaft only to suit Klargester BB, BA-X Range
KLARGESTER BIOTEC ( P18-P25 ) ACCESS LID ONLY
KLARGESTER BIOTEC ( P18-P25 ) ACCESS LID ONLY
Made from a high grade Glass Reinforced Plastic (GRP)
Comes complete with Locks
Seal not required
Dims:- 750mm W x 2525mm L x 50mm D
If a stong effluient smell is coming from the tank, the tank needs inspected
Note, keys are sold separate
P6-P12 BIOTEC ACCESS LID ONLY
P6-P12 BioTec Access Lid ONLY
Klargester BioTec Sewage Treatment Plant Access Lid Only,
Outer lid sold separately
Dims: Approximately 1735mm x 425mm
LED 6 VOLT BEACON
LED 6 Volt Beacon
The Beacon provides an external visual indication which is used to indicate Failure & Service Reminders and may be included in the Power and Pressure Failure Detection System (PPFDS).
The beacon is provided with a 5m cable which can be extended to 30m. As supplied
The unit is protected against rain to IP65 and is supplied ready to mount on a suitable surface.
This...
MANHOLE COVER & FRAME 630 x 630mm
MANHOLE COVER & FRAME 630 x 630mm
Galvanised 630mm x 630mm Manhole cover and Frame for Septic Tank/ Pump station and Sewage Treatment
(630mm x 630mm) complete with screws
MANN FILTER
C1337 Mann Filter
C1337 Filter, for filtering destructive particles such as dust, pollen, sand, soot and even drops of water out of the intake air.
Height: 125mm
OD/Width Max: 128mm
OD/Width Min: 128mm
ID/Depth Max: 64mm
ID/Depth Min: 64mm
METAL TOP RETAINING PLATE FOR FRONT BEARING
METAL TOP RETAINING PLATE FOR FRONT BEARING
Metal Backing Plate to hold the Klargester BA/BB Bearing Retaining Plate in place.
Used on BA, BB & BC BioDiscs.
NYLON RETAINING PLATE
NYLON RETAINING PLATE
Retaining plate to hold the front whole bearing in place on the BA-to BC BioDisc unit.
NON-RETURN VALVE
NON-RETURN VALVE
Non-return valve for BD-BG Grease Kit
P018-P025 ACCESS COVER LOCK
P018-P025 Access Cover Lock
Biotec P18-25 Access cover lock - long barrel type, complete with nut.
Note, that the older version of these are now obsolete. The thread length on the new version is 12mm and slight adjucstments might need made if its an older unit
P006 BALE
BALE ASSEMBLY P006
Filtration Media to Suit Biotec P006 Sewage Treatment Systems
Comes complete with Enkamat Netting/Matting
Bale size: 1200mm (L) X 825mm (W) X 600mm (H)
P012 STEEL BEAM
P012 Steel Beam
Fully galvanised steel beam to suit P012 Biotec sewage treatment system. Is used to support filtration bale
P006 STEEL BEAM
P006 Steel Beam
Fully galvanised steel beam to suit P006 Biotec sewage treatment system. Is used to support filtration bale
P006-012 HOSE REDUCER
P006-012 Hose Reducer
5/8" ID to 1/2" ID Unequal Hose Reducer
Blue Tefen Nylon Fitting
3/4' Hose Joiners
3/4" Hose Joiners
3/4" Hose Joiners used in P018-25 BioTec
Materials: Blue Tefen Plastic
PANASONIC KEYWAY
PANASONIC KEYWAY
Keyway for Panasonic Motor and top pulley ( BA - BB BioDisc only)
PERIPHERAL DRIVE WHEEL FOR B1 B2 BIODISC
PERIPHERAL DRIVE WHEEL FOR B1 B2 BIODISC
PERIPHERAL DRIVE WHEEL 61 TEETH
To suit B1, B2, FA, FB, FC BIODISC
PERIPHERAL DRIVE ROLLER KIT FOR KLARGESTER BIODISC
PERIPHERAL DRIVE ROLLER KIT FOR KLARGESTER BIODISC
This complete set of 12 peripheral drive rollers including nuts, bolts and washers, can be used in conjunction with the Klargester biodisc BA, BB and BC Sewage Treatment Systems
PIPE DIFFUSER 65MM X 400MM
PIPE DIFFUSER 65MM X 400MM
For Biosafe 1 and Delta 1 tanks
PPFDS PIPEWORK
PPFDS PIPEWORK
Hose to allow PPFDS system to connect
Per metre
PROXIMITY / REED SWITCH
Proximity Switch (ONLY)
This proximity switch can be used on the Kingspan Klargester Biodisc Units. The switch is located beside the motor gearbox in the tank.
Used in conjunction with the Loss of Rotation magnet.. This magnet is located on the rotor and with each revolution both the magnet and switch will contact. Once this cycle is broken the alarm will sound thus signalling the loss of rotation.
If...
PUMPWELL ASSEMBLY
Pumpwell Assembly
1no IPS Pumpwell
2no Scrum Baffle
To be used to convert your gravity system into an IPS unit (Pumped Outlet)
PUMPWELL (1 METRE) PIPEWORK
Pumpwell (1 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufatured in one complete part
Sewage Treatment Plant Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.