Featured Products
Panasonic Gearbox / Motor, FREE TOP PULLEY*(*worth 35.74 ex VAT) & Free delivery
(€344.34 inc VAT)
Klargester BA/BA-X/BB BioDisc Panasonic Motor / Gearbox
The Klargester Biodics motor/ gearbox by Panasonic is a genuine Klargester Biodisc spare part for the BA/ BA-X/ BB Biodisc sewage treatment plant.
This motor / gearbox is a direct replacement for the Vipa Motor Gearbox.
The Fully enclosed spare part for the Klargester Biodisc Sewage Treatment Plant is grease filled for smooth operation,...
from €279.95 ex VAT (€344.34 inc VAT)
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
€POA
GRP Kit / Fibreglass Repair Kit (2m)
(€145.62 inc VAT)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
€118.39 ex VAT (€145.62 inc VAT)
PIPE DIFFUSER 65MM X 400MM
PIPE DIFFUSER 65MM X 400MM
For Biosafe 1 and Delta 1 tanks
PPFDS PIPEWORK
PPFDS PIPEWORK
Hose to allow PPFDS system to connect
Per metre
PROXIMITY / REED SWITCH
Proximity Switch (ONLY)
This proximity switch can be used on the Kingspan Klargester Biodisc Units. The switch is located beside the motor gearbox in the tank.
Used in conjunction with the Loss of Rotation magnet.. This magnet is located on the rotor and with each revolution both the magnet and switch will contact. Once this cycle is broken the alarm will sound thus signalling the loss of rotation.
If...
SCL 15 DH .37kw BLOWER
SCL 15 DH .37kw BLOWER
These blowers are ideal for sewage treatment systems, pond aeration. Oil-free, pulse-free air at a very low decibel between 58 - 80 dB(A). These blowers can be mounted in any position and are designed with a unique design that channels air into sound absorbing foam to help miniumise noise.
Aluminium alloy construction, High efficiency impeller, comes complete with air filter
Single...
HIGH LEVEL ALARM (BASIC)
High Level Alarm Kit (Basic Range)
High Level alarm unit complete with float
Secoh EL-60 - 150 Filter
Secoh EL-60 - 150 Filter
Filter used in the Secoh EL 60 - 150 blower units.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh JDK 40-50 Service Kit
Secoh JDK 40-50 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
Secoh JDK-S-60 - 120 Filter
Secoh JDK-S-60 - 120 Filter
Filter for the Secoh JDK-S 60 - 120 blower range.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
SECOH JDK-S-50 SINGLE SERIES BLOWER
SECOH JDK-S-50 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
SECOH JDK-S-60 SINGLE SERIES BLOWER
SECOH JDK-S-60 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
SECOH JDK 60-80 SERVICE KIT
SECOH JDK 60-80 SERVICE KIT
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
SECOH JDK-S-80 SINGLE SERIES BLOWER
SECOH JDK-S-80 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism...
SECOH JDK-S-100 SINGLE SERIES BLOWER
SECOH JDK-S-100 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism...
Secoh JDK 100-120 Service Kit
Secoh JDK 100-120 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no Diaphragms
2no...
SECOH JDK-S-120 Single Series Blower
SECOH JDK-S-120 Single Series Blower
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism guarantee...
SECOH JDK-S-150 SINGLE SERIES BLOWER
SECOH JDK-S-150 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This is a direct replacement for the Secoh Sangyo EL-80-15 and ET100.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of...
DIAPHRAGM SET -JDK 150-500
DIAPHRAGM SET -JDK 150-500
The SE41 Diaphragm Kit is suitable for Secoh JDK 60-120 Blowers, including:
JDK-S-150
JDK-150C
JDK-S-200
JDK-250C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note that the below range requires 2no kits per blower
JDK-S-300
JDK-300C
JDK-S-400
JDK-400C
JDK-S-500
JDK-500C
Note, these...
SECOH JDK-S-200 SINGLE SERIES BLOWER
SECOH JDK-S-200 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated mechanism...
SECOH JDK-S-250 SINGLE SERIES BLOWER (EL-250)
SECOH JDK-S-250 SINGLE SERIES BLOWER (EL-250)
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated...
JDK 150-500 Filter
JDK 150-500 Filter
JDK 150-500 Filter - to suit Secoh JDK Blowers from 150 to 500 range
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh JDK 150/200/250/300/400/500 Service Kit
Secoh JDK 150/200/250/300/400/500 Service Kit
All our Genuine Secoh service kits are sealed to help protect them from dust and light, easy to install and will help pro-long the life of your Secoh blower.
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Secoh Service Kit for JDK Series air pumps contains:
2no...
Small Grey Kiosk
Small Grey Kiosk
Strong Polypropylene Plastic Kiosk complete with small lock and keys.
406mm wide
330mm deep
686mm high
SOLENOID TIMER
Solenoid Valve Programmable Cycle Timer
Programmable Timer for use with most Solenoid valves , programmable On & Off to cycle over a period of set times, fully automatic and easy to install
This time is able to cycle between Off cycle: 0.5 to 10 seconds, 0.5 to 45 minutes, 0.5 to 60 minutes and 25 to 150 minute and On cycle: 0.5 to 10 seconds, 0.25 to 5 minutes, 0.5 to 10 minutes and 0.5...
SOLENOID VALVE
SOLENOID VALVE
To be used with the solenoid timer on below link :-
Solenoid Timer
Used in Bioficient unit
Pressure: 0-7 Bar
Normal Close
Orifice: 13mm
Voltage: 220v AC
Stainless Steel Hose Fixing
Stainless Steel Hose Fixing
25-35mm
€9.20 delivery will be added at the Shopping Cart
Treatment Tank Control Panel (Smart Range)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control...
110MM GROMMET C/W 10MM THROAT
110MM GROMMET C/W 10MM THROAT
These grommets are used for inlet and outlet pipes for Septic tanks and also for Sewage treatment tanks.
SEPTIC TANK COVER & FRAME 450 x 600mm
SEPTIC TANK COVER & FRAME 450 x 600mm
Cover and Frame to suit Septic Tanks.
Replaces lid CFL460E - If lid just required, please discard the frame.
Dimensions 450mm x 600mm
Please see dimensions on image above.
1 1/2' BRASS NON-RETURN VALVE
1 1/2" BRASS NON-RETURN VALVE
1 1/2 inch Brass NRV - mainly used in Pump Chambers.
Single Pump Control Panel Single Phase
Kingspan / Klargester Single Phase Single Control Panel
This panel gives the customer security in knowing when something is wrong and that this 230 volt single control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These are sold...
DUAL PUMP CONTROL PANEL 1 PHASE
Kingspan / Klargester Single Phase Twin Control Panel
This panel gives the customer security in knowing when something is wrong and that this 230 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These are sold seperately...
PUMP CHAMBER COVER/LID
Pump Chamber Cover
900mm Diametre inside, outside 1060mm
Strong and Durable 5mm thick GRP material
Finish: Olive Green Gel Coat
50mm outer lip
Strong cross brasing for extra strength
12.5Kg
NON RETURN VALVE 1 1/4 BRASS (SWING)
NON RETURN VALVE 1 1/4 BRASS (SWING)
1 1/4 inch Brass swing NRV, mainly used in Pump Chambers.
12V XENON AMBER BEACON
12V XENON AMBER BEACON
12V Xenon Beacon for control panels
24V Red Xenon Beacon
24V Red Xenon Beacon
24v Red Flashing Xenon beacon
Mainly used on Small Pump Chamber Unit's or High Level Alarms
Height: 42mm Width: 75mm
230V RED FLASHING XENON BEACON
230V RED FLASHING XENON BEACON
1 phase red Flashing beacon
Ideal for alarm control panels typical in pump control industry
Height: 44mm - Width: 76mm
SMARTSERV PRO
Gain real-time access to vital information from your wastewater system to your phone or computer with SmartServ Pro. Such visibility will allow you to monitor the performance for your system anytime, anywhere, without having to travel to each installation to gather individual readings. For more information, please call 051-351325
BLACK STRAPPING 12MM (PER METRE)
BLACK STRAPPING 12MM (PER METRE)
12mm black polypropylene hand strapping used to hold separator foam filters in place, needing 2no 12mm buckles for each strap
Sold per metre lengths
€9.20 postage will be added at the checkout.
COALESCER FOAM FILTER - (250 X 300 X 100)
COALESCER FOAM FILTER - (250 X 300 X 100)
Klargester Full Retention Separator Foam Filters - 250 x 300 x 100
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS003-NS015 (A)
COALESCER FOAM FILTER - NS003-NS015 (A)
Klargester Full Retention Separator Foam Filters - ns003-ns015 ( A 340mm)
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS003-NS015 (B)
COALESCER FOAM FILTER - NS003-NS015 (B)
Klargester Full Retention Separator Foam Filters - ns003-ns015 ( B 560mm)
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS010-018
COALESCER FOAM FILTER - NS010-018
Klargester Full Retention Separator Foam Filters - ns010-018
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS3-6
COALESCER FOAM FILTER - NS3-6
Klargester Full Retention Separator Foam Filters - ns3-6
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS80-NS200-NB55-130
COALESCER FOAM FILTER - NS80-NS200-NB55-130
Klargester Full Retention Separator Foam Filters - ns80-ns200-nb55-130
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NSBD
COALESCER FOAM FILTER - NSBD
Klargester Full Retention Separator Foam Filters - nsbd
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NSBD018
COALESCER FOAM FILTER - NSBD018
Klargester Full Retention Separator Foam Filters - nsbd018
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber.
COALESCER FOAM FILTER - NSBD024-36
COALESCER FOAM FILTER - NSBD024-36
Klargester Full Retention Separator Foam Filters - nsbd024-36
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NSBD055-130
COALESCER FOAM FILTER - NSBD055-130
Klargester Full Retention Separator Foam Filters - nsbd055-130
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Wastewater Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.