Grid
List
Replacement keys For FuelMaster (Pack Of 2)
Replacement keys For FuelMaster (Pack Of 2)
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Old Style; operated by triangle plastic key - Will fit ALL OLD Bunded Tanks
Comes commplete with hinge
Please Note: These lids are not interchangeable between old & new tanks
19'' Retrofit Green Screw Cap
19'' RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
4" LOCKABLE OIL TANK LID
4" LOCKABLE OIL TANK LID
4" Lockable Oil Tank Inspection Cap in oil resistant polymer. Suitable for retrofit to Harlequin tanks incorporating an existing 4" Inspection Aperture and Screw Cap. Accepts key or combination padlocks providing a visible deterrent against fuel theft.
Supplied complete with:
4" Cap and brackets
Self tapping screws
Dipstick attachment...
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin)
The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16" lid (approx. dimension) - ATLAS bunded oil tanks only.
16" diameter manhole lid 'Quarter Turn' style Manhole Access Point.
Supplied complete with:
Lockable Plastic Manhole Lid
Retention Ring
Weatherproof Gasket
Fits Older Atlas and Titan Bunded Tanks.
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks
Comes complete with hinge
Please Note: These lids are not interchangeable between old & new tanks
Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Fits onto the tank inspection point/inlet.
Fits all Atlas Single Skin and Bunded Tanks
FUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK
(Comes with 2 keys)
Lock for all Titan FuelMaster and TruckMaster tanks.
LID LOCKING STUD
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
LOCKING LOOP & NUT
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP
This part was Green on most tanks when first produced - screws into place.
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16'' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16" (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks.
Old style red arm hinged lid.
Titan 19 inch Oil Tank Lid
TITAN 19'' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24''??OIL TANK LID
TITAN 24'' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
Titan Oil Tank 2 inch Vent Cap
TITAN OIL TANK 2'' VENT CAP
Replacement 2'' vent cap for TITAN oil tanks only.
TITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP
Replacement cap for TITAN oil tanks only.
Fits onto the tank inspection point/inlet (new style).
TruckMaster Shackle
TruckMaster Shackle
For use with the TruckMaster 430 and the TruckMaster 900
4 x shackles are needed - please order 4 no. for a complete set.
ADJUSTABLE OIL CLOCK GAUGE
ADJUSTABLE OIL CLOCK GAUGE
This adjustable oil clock gauge is suitable for for indoor and outdoor tanks containing fuel, oil/diesel fuel, biofuel, biodiesel and motor oil. This clock level gauge is intended for use with open vented stationary tanks. The clock gauge can be adjusted to the desired height of any tank from 1m to 2m.
Specification:-
Meter house 110mm dia in high quality UV...
APOLLO SMART OIL MONITOR/ GAUGE
APOLLO SMART OIL MONITOR / GAUGE
Apollo Smart is the world's first heating oil energy monitor now with inbuilt Fuel Theft Alarm. Unlike traditional oil tank contents gauges, Apollo Smart allows you to monitor the volume of useable fuel remaining inside your tank, heating oil consumption, energy costs, air temperature and carbon emissions - from the warmth, comfort and convenience of your home....
APOLLO STANDARD ULTRASONIC CONTENTS GAUGE
APOLLO STANDARD ULTRASONIC CONTENTS GAUGE
Apollo Ultrasonic is the original ultrasonic oil tank contents gauge and comprises a tank mounted transmitter unit and a plug in receiver unit.
The transmitter monitors the level of fuel inside the tank and relays this data via a secure, wireless connection to the receiver unit, which cleverly and conveniently plugs into a standard electrical socket....
APOLLO VISUAL BUND OIL GAUGE
APOLLO VISUAL BUND ULTRASONIC CONTENTS GAUGE
Apollo Bund is a fuel tank level monitor and bund warning alarm, cleverly integrated into a single, convenient product, which comprises a tank mounted transmitter unit, spillage detector and a plug in receiver unit.
The transmitter monitors both the level of fuel inside the tank and the area between the inner and outer tank. This data is relayed via...
APOLLO VISUAL OIL TANK GAUGE
APOLLO VISUAL ULTRASONIC CONTENTS GAUGE
Apollo Visual builds upon the success of the original Apollo Ultrasonic oil level monitor. Like the Apollo Ultrasonic, Apollo Visual comprises a tank mounted transmitter unit and a plug in receiver unit.
The transmitter monitors the level of fuel inside the tank and relays this data via a secure, wireless connection to the receiver unit, which cleverly...
FMT 3 ELECTRONIC FLOW METER
FMT 3 ELECTRONIC FLOW METER
The FMT 3 Electronic Flow Meter is precise, robust and versatile. This new generation electronic flow meter can be used with a wide range of liquids such as fuel oil / diesel, water and antifreeze. The FMT 3 Electronic Flow Meter with illuminated digital display utilises the measurement principle of a turbine wheel counter.
The two-line LED display shows the current...
SENSiT SMART OIL TANK MONITOR/ GAUGE
SENSiT SMART OIL TANK MONITOR/ GAUGE
The Kingpsan SENSiT is a smart Wi-Fi tank level monitor that enables you to monitor and control your liquid levels through the smartphone app from your smartphone or tablet. You can check your tank's level from anywhere, and you will get notifications to your smart device tell you of sudden drop alerts, predicted run out, consumption monitoring, low level...
TITAN FUELMASTER CLOCK GAUGE
TITAN FUELMASTER CLOCK GAUGE
Titan Mechanical Clock gauge - Width:1245mm x Height:1135mm. Displays 1 - 100% fill.
For use only in cabin of Fuelmaster only - not weatherproof.
TRUCKMASTER 430 CLOCK GAUGE
TRUCKMASTER 430 CLOCK GAUGE
Clock gauge for TruckMaster 430
TRUCKMASTER 900 CLOCK GAUGE
TRUCKMASTER 900 CLOCK GAUGE
Clock gauge for TruckMaster 900
UNITEL HYDROSTATIC TANK GAUGE 20M
UNITEL HYDROSTATIC TANK GAUGE 20M
The Unitel Hydrostatic Fuel Tank Gauge is a pneumatic tank level indicator designed for use with fuel oil and diesel. This fuel tank level gauge is plunged until the needle settles on the volume left within the storage tank, which is displayed as a percentage. Both horizontal and rectangular tanks with heights between 900mm and 3000mm can make use of these fuel...
WATCHMAN BUNDMAN
WATCHMAN BUNDMAN
The Watchman Bundman is a battery powered device which detects leakage from the inner tank of a double skinned / bunded tank. The device detects any liquid in the outer bund using a liquid sensor float switch which continuously monitors the bunded area, checking for the presence of liquid. This therefore gives an indication of a ruptured tank or a loss of weather-proofing with water...
WATCHMAN LT SENSOR
WATCHMAN LT SENSOR
The Kingspan Watchman LT sensor is a robust ultrasonic transmitter that provides reliable and continuous level or distance measurement of fluids, pastes, or solid bulk materials for application ranges from 200 mm to 6.5 meters. Incorporating state-of-the-art ultrasonic technology and processing algorithms, all Watchman LT models provide precision non-contact measurement for commercial...
3 METRE HOSE KIT
3m HOSE KIT
Supplied with swaged fittings, swivel nozzle and 1'' lever valve
4 METRE FUEL DELIVERY HOSE
4 METRE FUEL DELIVERY HOSE
4 metre fuel dispensing hose. Suitable for delivering diesel fuel up to 10 Bar pressure. 3/4'' hose with 1'' BSP fittings.
4 METRE HOSE KIT
4m HOSE KIT
Supplied with swaged fittings, swivel nozzle and 1" lever valve
6 METRE FUEL DELIVERY HOSE
6 METRE FUEL DELIVERY HOSE
Suitable for dispensing diesel fuel.
Tested to 10 Bar pressure. 3/4'' hose + 1'' BSP fittings.
6 METRE HOSE KIT
6m HOSE KIT
Supplied with swaged fittings, swivel nozzle and 1" lever valve
ANGLE VALVE HOSE KIT
ANGLE VALVE HOSE KIT
This angle valve hose kit can be used for gravity flow tank installations.
Comes with:
Piusi Self 2000 manual nozzle
Supplied with 1" angle valve with tapered thread
Integrated locking device
Available in 3m, 4m and 6m lengths
DIESEL SUCTION HOSE
DIESEL SUCTION HOSE
The Diesel Suction Hose is a sturdy and durable solution for fuel pump installations thanks to its strong, shock resistant reinforcement. Whilst this diesel suction hose is primarily designed for suction applications, it can also be used as a fuel delivery hose. This abrasion and weather resistant fuel suction hose can also be submerged into diesel should the application require...
PIUSI A120 AUTO NOZZLE & SWIVEL HEAD
PIUSI A120 AUTO NOZZLE & SWIVEL HEAD
The A120 nozzle is fitted with a device that automatically shuts off the flow of fuel when the tank is full.
Complete with 1"BSP swivel connector, it conforms to the strictest safety requirements and certifications. It is suitable as a fuel nozzle for both gas and diesel.
PIUSI A60 AUTO NOZZLE & SWIVEL HEAD
PIUSI A60 AUTOMATIC NOZZLE & SWIVEL HEAD
The A60 nozzle is fitted with a device that automatically shuts off the flow of fuel when the tank is full.
Complete with 1'' BSP swivel connector, it conforms to the strictest safety requirements and certifications.
PIUSI ATEX AUTOMATIC NOZZLE
PIUSI ATEX AUTOMATIC NOZZLE
Piusi Atex Automatic nozzles are fitted with a device that automatically shuts off flow when the tank is full. Complete with swivel connector they conform to the strictest safety requirements and bear all necessary certifications. The Piusi Automatic ATEX Fuel Nozzle has been specially designed for the safe dispensing of diesel, petrol or kerosene in flammable environments...
PIUSI HOSE REEL 1 inch
PISUI HOSE REEL 1''
Hose reel for diesel and oil supply hoses. Through careful design, Piusi have been able to limit pressure loss and facilitate use in this hose reel, even for high flow pumps like diesel refuelling systems.
Features:
Reduced pressure loss through the proper sizing of the hydraulic system
Protective latch mechanism that prevents accidental contact with the...
PIUSI HOSE REEL 3/4 inch
PIUSI HOSE REEL 3/4''
Hose reel for diesel and oil supply hoses.
Through careful design, Piusi have been able to limit pressure loss and facilitate use in this hose reel, even for high flow pumps like diesel refuelling systems.
Features:
Reduced pressure loss through the proper sizing of the hydraulic system
Protective latch mechanism that prevents accidental contact with...
STANDARD NOZZLE & SWIVEL HEAD
STANDARD NOZZLE & SWIVEL HEAD
These standard fuel nozzles are based on low resistance and are remarkably easy to use. These diesel nozzles are designed to be used with any type of transfer system, even those run by gravity.
Sturdy nozzle c/w 1'' swivel connector and trigger lock
Suitable for flow rates up to 120 l/m
5 bar pressure
25mm dia spout
These nozzles are designed...
10 MICRON CF100 FUEL FILTER CARTRIDGE
10 MICRON CF100 FUEL FILTER CARTRIDGE
Suitable for oil or diesel fuel.
Fuel filter available with 1'' ports .
12 Bar operating pressure.
100 l/min. Flow rate.
10 MICRON CF100 FUEL FILTER UNIT
10 MICRON CF100 FUEL FILTER UNIT
10 Micron Line fuel filter with Spin-on cartridge.
Suitable for oil or diesel fuel. Suitable for use on both suction and flowback side of hydraulic or lubricating systems.
Fuel filter is available with 1'' ports.
12 Bar operating pressure.
100 l/min. Flow rate.