2501L One Piece Insulated GRP Water Tank

Product Description

2501L ONE PIECE INSULATED GRP WATER TANK

This one piece insulated cold water storage tank is manufactured from WRAS approved GRP materials. These insulated water tanks have fully encapsulated insulation to sides and lid and a close fitting and sealed lid which is removable for maintenance. The insulated water tanks are supplied complete with screened vent and screened overflow unit up to a maximum of 2" to comply with The Water supply (water fittings) Regulations 1999. These insulated water tanks are manufactured to BS EN 13280:2001 and Quality System manufactured in accordance with ISO 9001:2000.

Suitable for all cold water applications including:

Potable & Non Potable water storage
Process water (including process cooling) applications -15º to +29º c
Provides mains water protection from fluid category 1, 2, 3 & 4 with standard lid arrangement & fluid category 5 when raised float valve housing is fitted

Specification:

Internal dims : 2000 x 1000 x 1250 mm
Manufactured from the highest quality GRP materials
CFC free PU foam insulation is completely encapsulated within the GRP laminate
Structural support where required is provided by rolled hollow section steel with welded corner jointing, which is also completely encapsulated within the GRP laminate
The outer surface of the tank is coated with polyester gel coat to ensure tank suitability for external positioning in most extremes of weather as standard

Nominal capacity shown

Nominal capacity = full capacity to top of tank

Actual capacity = float level

Please note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee). More options for fittings are available on request.

The Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tanks construction and overall strength of the base. This will benefit the tank if its on uneven surfaces or positioned raise supports. It will not come supplied as a separate item

Tank is supplied as standard with two built-in fixing pads, positioned at opposite ends of the tank (please see image for location of fixing pads).

A large range of sizes are available - if you need a size that is not online, please contact our sales team.

Delivery Terms:

It is the customers responsibility to offload. Tank is non-returnable so please confirm order before processing.

Product Specification

Product Code: PW
Colour: Grey
Made To Order: Made To Order
Material: GRP
Non-returnable: Non-returnable
Potable: Yes
Shape: Rectangular
Shipping: Customer Off Loading, Free Delivery
WRAS Approved: WRAS Approved
Volume: 2500ltr
Dimensions: L:2180mm W:1180mm H:1343mm

Delivery Terms

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier.

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request.

Returns Information

ORDER CANCELLATION

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie

After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325.

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee.
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss.