• display as grid Grid
  • display as list List
Page: 1 | 2 | 3 | 4 | 5 |
Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon Perfect for helping detect if a blower in a sewage system is failing. Can be bought to run along side the charles austen low pressure alarm
€59.96 ex VAT
(€73.75 inc VAT)
P18 - P25 COVER & ACCESS COVERP18 - P25 COVER & ACCESS COVER
P18 - P25 COVER & ACCESS COVER
P18 - P25 COVER & ACCESS COVER Biotec P18-P25 Complete cover, including the inner Surfboard style lid, Locks & Keys and Anti-Slip Mats Made from High grade Glass Reinforced Plastic (GRP) Green Powder coated protective layer Seal not required If a strong effluent smell is coming from the tank, the tank needs to be inspected
€POA
P18-P25 Klargester Biotec Sewage Treatment Plant Outer CoverP18-P25 Klargester Biotec Sewage Treatment Plant Outer Cover
P18-P25 Klargester Biotec Sewage Treatment Plant Outer Cover
Klargester BioTec Sewage Treatment Plant Outer Cover P18-P25 Biotec P18-P25 Complete cover, including the inner Surfboard style lid, Locks & Keys and Anti-Slip Mats Made from High grade Glass Reinforced Plastic (GRP) Green Powder coated protective layer Seal not required *Access cover, sold separately Dims: 2755mm diameter If a strong effluent smell is coming from the...
€POA
3 PHASE TWIN CONTROL PANEL3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel. This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
€1,316.80 ex VAT
(€1,619.66 inc VAT)
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
BC Biodisc Belt (1800mm) Replacement heavy-duty drive belt to suit Klargester BC BioDiscs manufactured pre-2006. 140no Teeth 8mm Pitch 20mm Wide Standard Duty HTD Belt The motor on these Biodisc Units high up in the tank and offside from the rotor.
€59.95 ex VAT
(€73.74 inc VAT)
BC Pulley Locking Element
BC Pulley Locking Element
BC Pulley Locking Element This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
€34.96 ex VAT
(€43.00 inc VAT)
BIODISC BA/BB LID EXTENSION NECK 550mm
BIODISC BA/BB LID EXTENSION NECK 550mm
BA-BB- Invert 550mm extension neck BA-BB- Invert 550mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework Materials:Glass Reinforced Plastic (GRP)
€POA
BIODISC BA/BB NYLON WASHERS
BIODISC BA/BB NYLON WASHERS
BA/BB BIODISC NYLON WASHERS PRICE IS FOR SINGLE WASHER** BA / BB BioDisc Nylon spacer washers used for the shaft. We recommend to order x6 in total. A delivery charge of €9.20 + vat will be added to the order at the checkout.
€11.53 ex VAT
(€14.18 inc VAT)
BIODISC GRAB HANDLE
BIODISC GRAB HANDLE
BIODISC GRAB HANDLE Black plastic Klargester Biodisc Handle to suit cover
€19.48 ex VAT
(€23.96 inc VAT)
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS Chain & Link Set for BA or BB Biodisc 1/2 BS Chain & Link Set - Biodisc replacement chain - Can be used on Biodisc Sewage Treatment Systems. This chain can be measured from centre to centre of each link. Strong, Simple, Versitile, Reliable This chain comes as standard 5 foot in length
€93.41 ex VAT
(€114.89 inc VAT)
110MM BLANKING CAP
110MM BLANKING CAP
110MM BLANKING CAP PVC Plastic Closing Cap To suit standard sewage piping
€25.78 ex VAT
(€31.71 inc VAT)
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER Air Filter to suit ET-60 and ET-80 Charles Austen Blower
€15.74 ex VAT
(€19.36 inc VAT)
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel Panasonic pinion wheel is suitable for Klargester B1 to BF treatment systems. Suited for panasonic gearboxes. PCD - 180mm
€129.31 ex VAT
(€159.05 inc VAT)
BA Rotor Assembly Complete
BA Rotor Assembly Complete
BA Rotor Assembly Complete Full rotor pack for 1 x BA Biodisc This product is made to order, lead time 2 to 3 weeks.
€POA
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm BA-BB- Invert 300mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework Materials:Glass Reinforced Plastic (GRP)
€POA
BC 1/2 Nylon BearingBC 1/2 Nylon Bearing
BC 1/2 Nylon Bearing
BC 1/2 Nylon Bearing This is a Klargester half bearing to fit the non-drive end of a Klargester BioDisc BC Sewage Treatment System. 30mm wide
€32.37 ex VAT
(€39.82 inc VAT)
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit Klargester BC BioDisc Bearing kit for the drive end. The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
€75.29 ex VAT
(€92.61 inc VAT)
BC Biodisc Belt (1120mm)
BC Biodisc Belt (1120mm)
BC Biodisc Belt (1120mm) Replacement heavy duty drive belt to suit Klargester BC BioDiscs 140no Teeth 8mm Pitch 30mm Wide Standard Duty HTD Belt
€34.73 ex VAT
(€42.72 inc VAT)
BC BioDisc Bottom PulleyBC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems. 30mm wide 8mm pitch 65mm Plain Bored 80 Teeth Torerance H9 Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when changing the botttom pulley
€97.63 ex VAT
(€120.08 inc VAT)
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End) Klargester BC BioDisc Whole Bearing for the drive end. A Klargester BC BioDisc nylon bearing for the Klargester BC BioDisc Sewage Treatment Systems (30mm) and comes with a grey insert.
€55.36 ex VAT
(€68.09 inc VAT)
BD Metal Top Retaining Plate for Front Bearing
BD Metal Top Retaining Plate for Front Bearing
BD Metal Top Retaining Plate for Front Bearing Used on BD Biodisc
€43.86 ex VAT
(€53.95 inc VAT)
BD/BE BEARING BUSH HALF x 2noBD/BE BEARING BUSH HALF x 2no
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820 Comes as a pair of 2no
€40.80 ex VAT
(€50.18 inc VAT)
BD/BE BEARING HOUSINGBD/BE BEARING HOUSING
BD/BE BEARING HOUSING
BD/BE BEARING HOUSING The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems. This listing is for one single half bearing (Each Biodisc contains 2)
€53.85 ex VAT
(€66.24 inc VAT)
BD/BE Bottom Pulley for BiodiscBD/BE Bottom Pulley for Biodisc
BD/BE Bottom Pulley for Biodisc
BD BioDisc Bottom Pulley The BD BioDisc Bottom Pulley fits the main media shaft on all Klargester BD BioDisc Sewage Treatment Systems. A BD BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
€163.06 ex VAT
(€200.56 inc VAT)
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc The BD/BE Locking Element for Biodisc is suitable for all Klargester BD/BE BioDisc Sewage Treatment Systems. The locking element fits into the centre of the pulley and makes sure it is secured to the BioDisc shaft. RCK40-40x65 SHAFT CLAMPING ELEMENT
€36.89 ex VAT
(€45.37 inc VAT)
BD/BE TOP PULLEY FOR BIODISCBD/BE TOP PULLEY FOR BIODISC
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant 17 Teeth 5/8" Pitch F7 Tolerence 20mm Wide High Torque Drive Pulley Bored 20mm Grubscrew Supplied British Standard Keyway
€43.11 ex VAT
(€53.03 inc VAT)
BF BIODISC COVER ASSEMBLY
New Corner Triangle
BF BIODISC COVER ASSEMBLY
BF BIODISC COVER ASSEMBLY
€POA
BF Bottom Pulley for BiodiscBF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc The BF BioDisc Bottom Pulley fits the main media shaft on all Klargester BF BioDisc Sewage Treatment Systems. A BF BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
€165.21 ex VAT
(€203.21 inc VAT)
BF-TOP-PULLEY-BIODISC
BF-TOP-PULLEY-BIODISC
BF-TOP-PULLEY-BIODISC The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BF top pulley comes with a grubscrew to lock into position 17T 5/8 INCH DUPLEX PINION BORED 25mmF7.
€47.37 ex VAT
(€58.27 inc VAT)
BF/BG Drive End Bearing (45mm)BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm)
BF/BG Drive End Bearing (45mm) The BF/BG Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
€360.42 ex VAT
(€443.32 inc VAT)
BF/BG LOCKING ELEMENTBF/BG LOCKING ELEMENT
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
€42.80 ex VAT
(€52.64 inc VAT)
BF/BG Non Drive End BearingBF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
€360.42 ex VAT
(€443.32 inc VAT)
BG-Bottom-PulleyBG-Bottom-Pulley
BG-Bottom-Pulley
BG-Bottom-Pulley This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft. This requires a BG Pulley locking element
€292.82 ex VAT
(€360.17 inc VAT)
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems. The BG top pulley comes with a grubscrew to lock into position 19T 3/4 INCH DUPLEX PINION BORED 30mmF7
€98.39 ex VAT
(€121.02 inc VAT)
Biodisc Adaptor BracketBiodisc Adaptor Bracket
Biodisc Adaptor Bracket
Biodisc Adaptor Bracket This biodisc bracket is manufactured to mount the motor on a B1-B2 Biodisc Sewage Treatment System to convert Panasonic from Stephan motor/gearbox. Fully Galvanised 6mm mild steel plate Wieght: 2.79Kg
€97.83 ex VAT
(€120.33 inc VAT)
BIODISC BB ROTOR PACKBIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK Klargester BB Rotor Pack is a replacement sewage treatment assembly to suit the BB range of Biodisc.
€POA
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION Magnet for Loss of Rotaion Alarm on a BioDisc. If you need the full kit see below :- Kingspan Parts Loss of Rotation Kit
€22.86 ex VAT
(€28.12 inc VAT)
BIODISC NYLON BEARING
BIODISC NYLON BEARING
BIODISC NYLON BEARING Bearing to suit Klargester BioDisc FA, FB and FC Sewage Treatment Systems. This bearing has a 25mm internal diameter and a closed off side (as pictured). For a full set you will need x2,
€83.11 ex VAT
(€102.23 inc VAT)
BIOFICIENT IPS MANIFOLD 6PE
BIOFICIENT IPS MANIFOLD 6PE
BIOFICIENT IPS MANIFOLD 6PE
€228.91 ex VAT
(€281.56 inc VAT)
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension Biotec P6-P12 Sewage treatment extension neck 495mm deep 1875mm diametre 50-50 Spray50% Filled Laminate Thickness: 7mm Weight: 33.17 35Kg
€POA
Charles Austen ET100-120 Filter
Charles Austen ET100-120 Filter
Charles Austen ET100/ET120 Filter This filter is suitable for use with the Charles Austen ET100 & ET120 Air Pump. Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating. Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
€15.82 ex VAT
(€19.46 inc VAT)
Coalescer Foam Filter - kf020 - 050Coalescer Foam Filter - kf020 - 050
Coalescer Foam Filter - kf020 - 050
Coalescer Foam Filter - kf020 - 050 Klargester Full Retention Separator Foam Filters - kf020-050 Clean regularly and replace when required this will help with efficiency of the tank To identify the type of filter you need, information should be on the inside of the neck of the chamber
€485.87 ex VAT
(€597.62 inc VAT)
Delta Clearwater Sewage treatment Lid/Cover (900mm)Delta Clearwater Sewage treatment Lid/Cover (900mm)
Delta Clearwater Sewage treatment Lid/Cover (900mm)
*2 Week Lead Time From Point of Order*
€POA
Delta Lid Galvanised Frame
Delta Lid Galvanised Frame
Delta Lid Galvanised Frame Fully Galvanised steel frame to suit Delta Main Cover for sewage treatment systems
€92.37 ex VAT
(€113.62 inc VAT)
Duplex Chain Link (To Suit BD/BE/BF)
Duplex Chain Link (To Suit BD/BE/BF)
DUPLEX CHAIN LINK To Suit BD/BE/BF DUPLEX DRIVE CHAIN (Remember to use good qualitiy grease to lubricate the chain when required.)
€23.43 ex VAT
(€28.82 inc VAT)
Duplex Chain Link (To Suit BG)
Duplex Chain Link (To Suit BG)
Duplex Chain Link To Suit BG DUPLEX DRIVE CHAIN (Remember to use good quality grease to lubricate the chain when required.)
€23.21 ex VAT
(€28.55 inc VAT)
EBARA BEST FOUR M SUMP PUMP
New Corner Triangle
EBARA BEST FOUR M SUMP PUMP
EBARA BEST FOUR M SUMP PUMP The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding. It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens. Technical Details Equipped with mechanical seal as per standard Corrosion...
€750.58 ex VAT
(€923.21 inc VAT)
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230vEbara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
New
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v The best one MS submersible electric pump is for clean & dirty water, it can be used in multiple applications including draining, garages, basements, cellars, or any other places that are subject to flooding. Also, it can be used to supply water to garden fountains and be used for easy emptying of large tanks and reservoirs....
€297.00 ex VAT
(€365.31 inc VAT)
Page: 1 | 2 | 3 | 4 | 5 |

Sewage Treatment Plant Accessories FAQs

What is a distribution box on a septic tank?

A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.

Is distribution box necessary?

The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.

What is the difference between septic tank and distribution box?

The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.