UV DISINFECTION UNIT 12GPM (45LPM)

UV DISINFECTION UNIT 12GPM (45LPM)
Ultraviolet disinfection is extremely fast, it requires no chemicals or additives and cannot be overdosed.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
PWG Ireland Ltd
What makes this (45LPM) the right choice?
UV DISINFECTION UNIT 8GPM (30LPM)
UV is a useful disinfection method of removing micro-organisms from water to make it safe to use. The UV Disinfection Units use UV light to destroy bacteria, viruses, spores and moulds and their ability to reproduce. Ultraviolet disinfection is extremely fast, it requires no chemicals or additives and cannot be overdosed. No chemical residuals are left in the treated water. The UV intensity (dose) is measured in mJ/cm2. For domestic situations UV systems should give at least 30 mJ/cm2 and for larger industrial systems 40 mJ/cm2. The dose required to inactivate bacteria depends on the bacteria. The higher the dose of UV the more of each bacteria are killed.
The UV disinfection unit eliminates the risk of overdoing using chemicals or leaving an unpleasant taste. UV sterilizers are low maintenance and are cheap to run. These systems are designed for low to medium flow rate applications. The lamps offer a full 1 year lifespan and inexpensive replacement costs.
All systems incorporate the latest high frequency lamp driver circuitry with lamp
- operating / failure warning lights
- 9000 hour life output UVC lamps
- 304 mirror finish stainless steel construction
Typical Applications:
- Drinking water from wells, springs and other untreated supplies
- Water filtration and treatment plants
- Fish farms, for the control of micro-organisms
- Algae control inonds and general aquatic use
- Re-circulating loops and high purity water systems
This UV disinfection unit requires 20" Filter Housing with 20" Water Filter 5 Micron cartridge to be installed ahead of the UV unit.
Specification:
| GENERAL INFORMATION | |
| Max flow rate | 45 l/m |
| UVC transmittance | 99%- 1 cm |
| UVC dose | 300 J/m2 |
| Water Temperature range | 5-50° C |
| Total consumption | 44 W |
| Mounting | Vertical or horizontal |
| UV REACTOR | |
| Material | Stainless Steel 304 (optional 316L) |
| Connections | Thread 1” M |
| Total Volume | 1.8l |
| Total weight | 2.5 kg |
| Max working pressure | 10 bars g |
| Protection class | IP 54 |
| Shape | U |
| Flow direction | From bottom to top |
| UV LAMP | |
| Number | 1 |
| Lifespan | 9000 hr |
| Lamp power | 40 W |
| Type | Low pressure type 028102 |
| CONTROL PANEL AL2 | |
| Material | Thermoplastic |
| Dimensions | 118 x 60 x 64 mm |
| Protection class | IP 54 |
| Ambient temperature range | 5 – 45 °C |
| Power supply | 230 V - 50/60 Hz |
| Lamp cable length | 1m |
| Power supply cable | 1m |
| Feed plug | SCHUKO, UK or passing wires |
| Monitor display | LCD SITA |
| Days meter | Yes for total system life |
| Resettable days meter | Yes for lamp life control |
| Audio alarm | With silence options |
Technical data
Full specifications
| Physical | |
| Diameter | 60 mm |
| Empty weight | 2 kg |
| Reference | |
| SKU | 2502020005 |
| EDEL code | EDELP00317407 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Customers also bought
You may also need
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.


