REVERSE OSMOSIS MEMBRANE REPLACEMENT 5
REVERSE OSMOSIS MEMBRANE REPLACEMENT 50GPD
These membranes should be changed every 12 months depending on water quality.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
PWG Ireland Ltd
What makes this 50GPD the right choice?
REVERSE OSMOSIS MEMBRANE REPLACEMENT 50GPD
These reverse osmosis (RO) membranes for home drinking water treatment units are some of the most reliable and consistent elements in the industry. These membranes should be changed every 12 months depending on water quality.
Specifications:
- Applied pressure - 50 PSI / 3.4 Bar
- Permeate Flow Rate l/h - 7.9
- Stabilized salt rejection - 98%
- Max Operating Temperature - 45°C
- Max Operating Pressure - 150 PSI (10 bar)
- Max Feed Flow Rate 0 7.6 lpm
- Dims: 298mm Length x 45mm Diameter
Technical data
Full specifications
| Physical | |
| Diameter | 45 mm |
| Reference | |
| SKU | 1114000001 |
| EDEL code | EDELP00317407 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.
