HYTEK MANUAL ADBLUE NOZZLE
Hytek Manual AdBlue nozzle
80L AdBlue storage and dispensing system for commercial and agricultural vehicle fleets. UV-stabilised polyethylene construction.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Hytek GB Ltd
What makes this nozzle the right choice?
Hytek Manual AdBlue Nozzle
The Hytek engineered AdBlue manual nozzle is a cost effect nozzle for use with AdBlue. The design features a polypropylene construction with stainless steel spout and also an integral hook for tidy storage when not in use (Potentially increasing the longevity of your hose and pump).
The manual AdBlue nozzle is suitable for use with gravity feed tanks and pumping dispensing systems, with a maximum flow rate of 80 litres per minute.
Product Features:
- Suitable for AdBlue and none-drinking water.
- Flow rate: 80lpm (litres per minute)
- For use with gravity feed tanks or electric pumps.
- Stainless steel tipped spout.
- Viton Seals.
- Integral hook for tidy storage when not in use.
- 2-year Warranty
Technical data
Full specifications
| Reference | |
| SKU | NOZ.AB |
| EDEL code | EDELP00183251 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.
