FLEDBAG EASY

FLEDBAG EASY
The FLEDBAG® Easy is recommended for the use of reusable tonne bags.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Kingspan Energy
What makes this EASY the right choice?
FLEDBAG EASY
This innovation FLEDBAG® Easy product lets you store big bags of feed, fertilizer etc safely and comfortably and empty their contents easily, quickly and precisely. The FLEDBAG® Easy is recommended for the use of reusable tonne bags.
The FLEDBAG® Easy has a innovative Vario gate valve allows for flexible dosage and has a steady and stable base. It has flexible folding handles so that on lowering the handles do not break off if the tonne bag is still swinging. There is no corrosion and can withstand the highest loads.
Specification:
- Suitable for animal feed, fertilizer, seeds, pellets, salt and granules
- Material: Polyamide with glass fibre
- Average flow depending on material density: 200 - 700 kgs/ minute
- Material rivets: Stainless steel
- Material screws: Galvanized
- Inner diameter: 140mm
- Height: 150mm
- Weight: 1.48kg
- Width with handles extended: 480mm
How does the FLEDBAG® Easy work?
1. Open the first knot on the big bag outlet and push the tensioning ring onto the protruding discharge hose.
2. Position the FLEDBAG® Easy on the discharge hose from underneath.
3. Pull the tensioning ring down, and fasten the tensioning ring with the discharge hose on the FLEDBAG® Easy. Do not attach the tensioning ring at the top edge, but along the neck of the FLEDBAG®.
4. Open the second knot on the outlet so that the content can run into the FLEDBAG® Easy. Open the slide to empty.
Technical data
Full specifications
| Physical | |
| Diameter | 140 mm |
| Empty weight | 1 kg |
| Reference | |
| SKU | 0101002 |
| EDEL code | DELIVERY |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.