DISTRIBUTION BOX RISER
DISTRIBUTION BOX RISER
These risers are stackable, fixed together with screws.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Polylok Ltd
What makes this RISER the right choice?
DISTRIBUTION BOX RISER
These risers are designed for use with the 300mm, 500mm and 600mm covers, adapters and the 4/5, 7 and 10 hole inspection/distribution chamber. These risers are stackable, fixed together with screws. Structural ribs inside prevent frost from adhering to the riser in frost prone areas.
- Can be cast into a concrete base or tank cover if required
- Easy to install
- UV-Ray Protection
- Easy to bring an access cover to grade
- Made of High Density Polyethylene which won't shatter like some Polypropylene risers
- Tear off riser ring if frost is a problem
Technical data
Full specifications
| Physical | |
| Diameter | 300 mm |
| Reference | |
| SKU | 3017-R-NG |
| EDEL code | EDELP00001505 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Technical documentation
Downloads & data sheets
Product video
See the RISER in action
Verified customers
What buyers say
Customers also bought
You may also need
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.
