ADAM PUMPS 66L/MIN DIESEL TRANSFER PUM
Adam Pumps 66L/Min Diesel Transfer Pump - 230V
Durable pump for reliable fluid transfer in domestic, agricultural and industrial environments. Low maintenance, high performance.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Hytek GB Ltd
What makes this 230V the right choice?
Adam Pumps 66L/Min Diesel Transfer Pump - 230V
Product Features:
- New and improved 66lpm (litres per minute) pump.
- Similar design and footprint as other branded pumps making it a perfect replacement option if needed.
- Direct drive, self-priming, vane pump unit.
- Comes supplied with: 2m mains cable and plug (European). internal filter and bypass valve.
- Weatherproof to IP55 for outdoor use.
- Suitable with Diesel or Biodiesel up to B30
- Inlet & Outlet size: 1" F BSP
- Max Flow - 66lpm
- 230v
- 1 year warranty
Please note: Adam Pumps are Italian made and therefore supplied with a 2 pin European plug (Europlug). You will either need to hardwire this into the mains, change the plug for a UK 3 pin plug or utilise an adaptor.
Technical data
Full specifications
| Physical | |
| Empty weight | 12 kg |
| Reference | |
| SKU | SPT66K |
| EDEL code | EDELP00183251 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.
