1225L STAKA DRINKING WATER TANK

1225L STAKA DRINKING WATER TANK
1225L water storage tank for domestic, agricultural and commercial applications. UV-stabilised MDPE for long outdoor service life.
Price on Application
This product requires a tailored quote. Complete the enquiry form and our team will be in touch.
Enquire About This Product
Submit the form below and our team will be in touch with pricing and availability.
Trailer Engineering Ltd
What makes this TANK the right choice?
1125L STAKA DRINKING WATER TANK
The 1125 litre stackable water tank is perfect for storage and distribution of drinking water. Originally manufactured for government and water authorities for storing drinking water in hidden locations and then moved into strategic locations around towns in need of a fresh water supply after natural disasters such as flooding. Perfect logistical manoeuvrability, these stackable water tanks can be easily stored as they can be stacked 3 high when empty and 2 high when full. Multiple lockable taps are available on these water tanks.
Tank:
- Polyethylene moulded tank, elliptical in section, baffled, blue approved for drinking water
- Fitted with a 22" Diameter lockable outer hinged manlid cover, inner sealed vented manlid
- Tank secured to frame with 2 stainless steel straps
- Internal anti surge baffle
- 2 rear lockable brass draw off taps
Frame:
- 4 legged pallet type frame constructed from 60 x 60 R.H.S Section
- 2 No. pressed steel fork truck channels fitted under base of tank frame
- 4 No. 70mm square pallet feet fitted to base of upright legs for locating frames
- 4 No. Built in 40mm diameter lifting eyes welded to uprights
- All framework fully hot dipped galvanised to British standards
Optional Extras:
- 2" Male hydrant connection
- Rubber blanking cap for male hydrant fitting
- Rear dog guards for taps
- 2" locking ball valve on discharge outlet
Technical data
Full specifications
| Physical | |
| Capacity | 1125 L |
| Empty weight | 180 kg |
| Reference | |
| SKU | 1225LSTAKA |
| EDEL code | EDELP00215533 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Technical documentation
Downloads & data sheets
Verified customers
What buyers say
Customers also bought
You may also need
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.



