{"title":"Two Piece Insulated GRP Water Tanks","description":"","products":[{"product_id":"1000-litre-grp-water-tank-two-piece-insulated","title":"1000 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 1000 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1000-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 1000 x 1000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1180 x 1180 x 1093 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947872809292,"sku":"PW1000-2","price":2072.98,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523521765708,"sku":"PW1000-2-50mm.INS","price":2383.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22820_6000.jpg?v=1763590801"},{"product_id":"1500-litre-grp-water-tank-two-piece-insulated","title":"1500 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 1500 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1500-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1500 x 1000 x 1000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1702 x 1202 x 1093 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947874480460,"sku":"PW1500-2","price":2600.38,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523522027852,"sku":"PW1500-250mm.INS","price":2990.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23433_6006_35929fc9-71ba-42ec-9ffc-10f0eebe3c35.jpg?v=1763590810"},{"product_id":"160-litre-grp-water-tank-two-piece-insulated","title":"160 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 160 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e860 x 560 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW160-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 760 x 460 x 460 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 950 x 655 x 499 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947877036364,"sku":"PW160-2","price":1122.77,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523522158924,"sku":"PW160-2-50mm.INS","price":1291.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22813_5853.jpg?v=1763590817"},{"product_id":"2000-litre-grp-water-tank-two-piece-insulated","title":"2000 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 2000 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1500-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2000 x 1000 x 1000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2202 x 1202 x 1093 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947878674764,"sku":"PW2000-2","price":3264.86,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523522912588,"sku":"PW2000-250mm.INS","price":3754.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22822_6026.jpg?v=1763590824"},{"product_id":"2500-litre-grp-water-tank-two-piece-insulated","title":"2500 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 2500 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2500-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2000 x 1000 x 1250 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2180 x 1180 x 1343 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947880247628,"sku":"PW2501-2","price":3947.0,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523523338572,"sku":"PW2501-250mm.INS","price":4539.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22823_6039.jpg?v=1763590830"},{"product_id":"250-litre-grp-water-tank-two-piece-insulated","title":"250 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 250 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 600 x 1050 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW250-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 500 x 500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1160 x 660 x 517 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947880739148,"sku":"PW250-2","price":1241.39,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523525566796,"sku":"PW250-250mm.INS","price":1427.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22814_5949.jpg?v=1763590837"},{"product_id":"340-litre-grp-water-tank-two-piece-insulated","title":"340 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 340 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW340-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 915 x 610 x 610 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1080 x 775 x 650 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947881394508,"sku":"PW340-2","price":1348.93,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523529531724,"sku":"PW340-250mm.INS","price":1551.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22815_5866.jpg?v=1763590843"},{"product_id":"454-litre-grp-water-tank-two-piece-insulated","title":"454 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 454 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1167 x 710 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW454-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1067 x 610 x 710 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1245 x 795 x 727 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947882803532,"sku":"PW454-2","price":1470.79,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523529793868,"sku":"PW454-250mm.INS","price":1691.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22816_5867.jpg?v=1763590850"},{"product_id":"570-litre-grp-water-tank-two-piece-insulated","title":"570 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 570 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e10900 x 860 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW570-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 990 x 760 x 760 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1150 x 925 x 799 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947883688268,"sku":"PW570-2","price":1558.84,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523529924940,"sku":"PW570-250mm.INS","price":1792.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22817_5868.jpg?v=1763590856"},{"product_id":"601-litre-grp-water-tank-two-piece-insulated","title":"601 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 601 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW601-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 500 x 1200 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1160 x 660 x 1217 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947884802380,"sku":"PW601-2","price":1758.86,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523530056012,"sku":"PW601-250mm.INS","price":2022.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22818_5986.jpg?v=1763590863"},{"product_id":"909-litre-grp-water-tank-two-piece-insulated","title":"909 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 909 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1268 x 990 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW909-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1168 x 890 x 890 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1330 x 1050 x 929 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":52947885392204,"sku":"PW909-2","price":1841.8,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53523369460044,"sku":"PW909-2-50mm.INS","price":2118.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22819_5886.jpg?v=1763590869"},{"product_id":"1050-litre-grp-water-tank-two-piece-insulated","title":"1050 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 1050 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 600 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1050-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1500 x 500 x 1400 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1665 x 665 x 1477 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524875084108,"sku":"PW1050-2","price":2936.71,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524875116876,"sku":"PW1050-2.50mm.INS","price":3377.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23433_6006_a8bee8ca-8087-4041-a36f-63e6d994cd6c.jpg?v=1763590876"},{"product_id":"1125-litre-grp-water-tank-two-piece-insulated","title":"1125 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 1125 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 600 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1125-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1500 x 500 x 1500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1665 x 665 x 1577 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524880621900,"sku":"PW1125-2","price":3014.04,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524880654668,"sku":"PW1125-2.50mm.INS","price":3466.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23434_6012_96c93f7f-c3e3-42f3-8fc3-77c1eed42c5e.jpg?v=1763590882"},{"product_id":"1135-litre-grp-water-tank-two-piece-insulated","title":"1135 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1135Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1135-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1524 x 915 x 812 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1680 x 1080 x 905 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524880785740,"sku":"PW1135-2","price":2430.18,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524880818508,"sku":"PW1135-250mm.INS","price":2794.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23413_5887_6769deee-c63b-46cd-9d5f-fafdfaa4f615.jpg?v=1763590889"},{"product_id":"1220-litre-grp-water-tank-two-piece-insulated","title":"1220 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1220 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1220-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 1000 x 1200 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1165 x 1165 x 1313 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524884193612,"sku":"PW1220-2","price":2310.46,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524884226380,"sku":"PW1220-2.50mm.INS","price":2657.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23435_6018_407f2677-1628-42ac-9cc8-24fbe2711239.jpg?v=1763590894"},{"product_id":"125-litre-grp-water-tank-two-piece-insulated","title":"125 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 125 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW125-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 500 x 500 x 500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 675 x 675 x 518 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524889370956,"sku":"PW125-2","price":973.57,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524889403724,"sku":"PW125-2.50mm.INS","price":1119.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23422_5940_851d229f-81b2-44d6-bd08-b47c779fbb76.jpg?v=1763590901"},{"product_id":"1364-litre-grp-water-tank-two-piece-insulated","title":"1364 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1364 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1364-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1570 x 1290 x 1008 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524890550604,"sku":"PW1364-2","price":2527.41,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524890583372,"sku":"PW1364-2.50mm.INS","price":2906.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23415_5893_1c5240b3-b4e4-4ac2-b5e0-7897a48a255b.jpg?v=1763590907"},{"product_id":"1501-litre-grp-water-tank-two-piece-insulated","title":"1501 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 1501 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1501-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 1000 x 1500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1160 x 1160 x 1593 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524893729100,"sku":"PW1501-2","price":2792.5,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524893761868,"sku":"PW1501-2.50mm.INS","price":3211.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/22821_6019.jpg?v=1763590916"},{"product_id":"1590-litre-grp-water-tank-two-piece-insulated","title":"1590 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 1590 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1243 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1590-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1524 x 1143 x 915 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1700 x 1310 x 1008 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524894318924,"sku":"PW1590-2","price":2741.21,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524894351692,"sku":"PW1590-250mm.INS","price":3152.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23416_5899_917f9efe-f521-422c-97ad-12e5e3997507.jpg?v=1763590922"},{"product_id":"1818-litre-grp-water-tank-two-piece-insulated","title":"1818 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1818 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1818-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1220 x 1220 x 1220 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1390 x 1390 x 1313 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524898120012,"sku":"PW1818-2","price":2980.45,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524898152780,"sku":"PW1818-2.50mm.INS","price":3427.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23417_5905.jpg?v=1763590928"},{"product_id":"187-litre-grp-water-tank-two-piece-insulated","title":"187 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 187 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW187-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 500 x 500 x 750 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 675 x 675 x 765 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524899430732,"sku":"PW187-2","price":1032.54,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524899463500,"sku":"PW187-2.50mm.INS","price":1187.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23423_5947_c9549d70-2740-48da-892f-fc719c4084be.jpg?v=1763590935"},{"product_id":"2001-litre-grp-water-tank-two-piece-insulated","title":"2001 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 2001 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2001-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 1000 x 2000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1160 x 1160 x 1093 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524902248780,"sku":"PW2001-2","price":3853.82,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524902281548,"sku":"PW2001-2.50mm.INS","price":4431.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23437_6032_4a943697-b8ed-4563-9273-e84527702c44.jpg?v=1763590942"},{"product_id":"2250-litre-grp-water-tank-two-piece-insulated","title":"2250 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e2250 Litre GRP Two Piece Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2250-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1500 x 1000 x 1500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1702 x 1202 x 1593 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524903526732,"sku":"PW2250-2","price":3306.84,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524903559500,"sku":"PW2250-2.50mm.INS","price":3802.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23443_6038_d7caa41e-d171-40ff-be71-0e21754f8111.jpg?v=1763590948"},{"product_id":"2272-litre-grp-water-tank-two-piece-insulated","title":"2272 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e2272 Litre GRP Two Piece Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2272-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2020 x 1410 x 1109 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524905492812,"sku":"PW2272-2","price":3466.13,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524905525580,"sku":"PW2272-250mm.INS","price":3986.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23418_5916_86b3033a-05c8-4f22-868e-5598e41b342b.jpg?v=1763590954"},{"product_id":"2726-litre-grp-water-tank-two-piece-insulated","title":"2726 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e2726 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2726-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1828 x 1220 x 1220 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2020 x 1410 x 1313 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524907196748,"sku":"PW2726-2","price":3742.95,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524907229516,"sku":"PW2726-250mm.INS","price":4304.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23419_5917_2bee022e-708b-4c0d-bac6-158f0308aa20.jpg?v=1763590960"},{"product_id":"3000-litre-grp-water-tank-two-piece-insulated","title":"3000 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 3000 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e3100 x 1100 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3000-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 3000 x 1000 x 1000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 3202 x 1202 x 1093 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524910735692,"sku":"PW3000-2","price":4761.66,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524910768460,"sku":"PW3000-250mm.INS","price":5475.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23447_6045_afbabe6e-8c21-42b1-b90c-92959937c918.jpg?v=1763590966"},{"product_id":"305-litre-grp-water-tank-two-piece-insulated","title":"305 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e305 Litre GRP Two Piece Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW305-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 500 x 500 x 1220 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 675 x 675 x 1237 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524912505164,"sku":"PW305-2","price":1481.13,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524912537932,"sku":"PW305-2.50mm.INS","price":1703.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23427_5955.jpg?v=1763590973"},{"product_id":"3185-litre-grp-water-tank-two-piece-insulated","title":"3185 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 3185 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2540x 1320 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3185-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2610 x 1410 x 1163 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524913914188,"sku":"PW3185-2","price":4643.73,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524913946956,"sku":"PW3185-250mm.INS","price":5340.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23420_5928_8125ff34-c0e7-4f67-9847-63d10b76313a.jpg?v=1763590979"},{"product_id":"338-litre-grp-water-tank-two-piece-insulated","title":"338 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e338 Litre GRP Two Piece Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e710 x 710 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW338-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 610 x 610 x 910 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 675 x 675 x 950 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524914307404,"sku":"PW338-2","price":1404.77,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524914340172,"sku":"PW338-250mmINS","price":1615.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23397_5860_29983390-ebbb-41d1-a6d7-15d9b651e399.jpg?v=1763590986"},{"product_id":"3636-litre-grp-water-tank-two-piece-insulated","title":"3636 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 3636 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2540x 1320 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3636-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2440 x 1220 x 1220 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 2610 x 1410 x 1313 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524914569548,"sku":"PW3636-2","price":4867.02,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524914602316,"sku":"PW3636-2.50mm.INS","price":5597.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23421_5934_a1e71520-2efc-4dd9-beff-64c3170a6174.jpg?v=1763590991"},{"product_id":"375-litre-grp-water-tank-two-piece-insulated","title":"375 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 375 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW375-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 500 x 500 x 1500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 675 x 675 x 1517 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524919124300,"sku":"PW375-2","price":1481.93,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524919157068,"sku":"PW375-2.50mm.INS","price":1704.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23428_5966_93341cdb-9c12-4e5a-a526-df823e334425.jpg?v=1763590998"},{"product_id":"500-litre-grp-water-tank-two-piece-insulated","title":"500 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 500 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW500-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 1000 x 500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1172 x 1172 x 539 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524919517516,"sku":"PW500-2","price":1541.02,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524919550284,"sku":"PW500-2.50mm.INS","price":1772.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23429_5979_5bc483b4-a105-466c-bc4b-cc34bb4022ae.jpg?v=1763591005"},{"product_id":"501-litre-grp-water-tank-two-piece-insulated","title":"501 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 500 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW501-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 500 x 1000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1160 x 660 x 1017 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524919681356,"sku":"PW501-2","price":1606.18,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524919714124,"sku":"PW501-2.50mm.INS","price":1847.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23430_5985_1f7a3793-93fb-413a-8cc8-a269ff8cf788.jpg?v=1763591011"},{"product_id":"650-litre-grp-water-tank-two-piece-insulated","title":"650 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e650 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1167 x 710 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW650-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1067 x 610 x 1000 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1245 x 795 x 1017 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524921024844,"sku":"PW650-2","price":1849.57,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524921057612,"sku":"PW650-2.50mm.INS","price":2127.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23399_5869_4ad4e3aa-748b-4c16-8af8-ee2045929b3c.jpg?v=1763591018"},{"product_id":"680-litre-grp-water-tank-two-piece-insulated","title":"680 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e680 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1320 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW680-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1220 x 915 x 610 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1395 x 1087 x 649 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524928233804,"sku":"PW680-2","price":1724.07,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524928266572,"sku":"PW680-2.50mm.INS","price":1982.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23401_5875_84ec791f-fb56-49ae-b410-ef32988f2659.jpg?v=1763591023"},{"product_id":"712-litre-grp-water-tank-two-piece-insulated","title":"712 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e712 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1190 x 960 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW712-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1090 x 860 x 760 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1240 x 1010 x 796 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524930199884,"sku":"PW712-2","price":1688.82,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524930232652,"sku":"PW712-2.50mm.INS","price":1942.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23403_5881_be1cb39f-08e1-4153-9de3-fce134e650dd.jpg?v=1763591030"},{"product_id":"750-litre-grp-water-tank-two-piece-insulated","title":"750 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e750 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW750-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1500 x 1000 x 500 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1702 x 1202 x 536 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524930298188,"sku":"PW750-2","price":1835.3,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524930330956,"sku":"PW750-2.50mm.INS","price":2110.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23431_5992_734f89a0-673c-48d2-93d8-1368b0ed9e9e.jpg?v=1763591035"},{"product_id":"751-litre-grp-water-tank-two-piece-insulated","title":"751 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e751 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"width:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW751-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1000 x 1000 x 750 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 1172 x 1172 x 789 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524930462028,"sku":"PW751-2","price":1687.95,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524930494796,"sku":"PW751-2.50mm.INS","price":1941.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23432_5998_0418cd45-dd7b-40ac-9ce2-e180ff244779.jpg?v=1763591042"},{"product_id":"90-litre-grp-water-tank-two-piece-insulated","title":"90 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 90 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\n \u003c\/h2\u003e\n\n\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e710 x 405 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW90-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 610 x 305 x 510 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\t\u003ctr\u003e\n\n\t\t\t\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n\t\t\t\u003ctd\u003e 775 x 478 x 522 mm\u003c\/td\u003e\n\n\t\t\u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\n\n\u003cp\u003e \u003c\/p\u003e\n\n\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\n\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\n\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":53524932297036,"sku":"PW90-2","price":975.13,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":53524932329804,"sku":"PW90-2-50mm.INS","price":1121.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23388_5832_62e7a4f7-df4c-4db2-9630-714ae8d8a704.jpg?v=1763591050"},{"product_id":"225-litre-grp-water-tank-two-piece-insulated","title":"225 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003eTwo piece 225 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\u003cli\u003e710 x 710 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\u003ccaption\u003e\n\u003cbr\u003e\n\u003ch3\u003ePW225-2 Dimensions\u003c\/h3\u003e\n\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e 610 x 610 x 610 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e 795 x 795 x 650 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":56092748546380,"sku":"PW225-2","price":1151.21,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":56092748579148,"sku":"PW225-2.50mm.INS","price":1323.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23389_5856.jpg?v=1764251795"},{"product_id":"251-litre-grp-water-tank-two-piece-insulated","title":"251 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e251 Litre Two Piece Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\u003cli\u003e600 x 600 x 1100 mm (1000 mm clearance to underside\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\u003ccaption\u003e\n\u003cbr\u003e\n\u003ch3\u003ePW251-2 Dimensions\u003c\/h3\u003e\n\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e 500 x 500 x 1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e 675 x 675 x 1018 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. Tank is non-returnable so please confirm order before processing.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA large range of sizes are available - if you need a size that is not online, please contact our sales team.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater Storage Ltd","offers":[{"title":"25mm Insulation (Standard)","offer_id":56093070590284,"sku":"PW251-2","price":1203.32,"currency_code":"EUR","in_stock":true},{"title":"50mm Insulation","offer_id":56093070623052,"sku":"PW251-2.50mm.INS","price":1383.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/files\/23426_6193.jpg?v=1774453709"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/8995\/6940\/collections\/Two_Piece_Insulated_GRP_Water_Tank.jpg?v=1783524618","url":"https:\/\/tanks.ie\/collections\/two-piece-insulated-grp-water-tanks.oembed?page=3","provider":"Tanks.ie","version":"1.0","type":"link"}